LG 22LY560M Commercial Mode Setup Manual Download Page 50

Page: 50 / 84

206-4261

Learning FTG Configuration from a TV

To ensure that decryption of Pro:Idiom encrypted channels is enabled, it is

recommended that you create an FTG Configuration file using the FTG File

Manager as described on pages 46 to 47. However, if necessary, there is an

option to save (Learn) an FTG Configuration file from an LY560M TV to a

USB memory device.
The option to save (Learn) an FTG Configuration file from a TV may be

desirable or required in either or both of the following situations:

•

If you want to save customized TV setup menu settings to the FTG

Configuration file, in addition to the FTG Channel Map and FTG Installer

Menu settings.

•

If you do not know the RF channels at the site, and you would like to use

the TV to search for the available RF channels.

Before You Begin

•

Ensure the USB device has been formatted with FAT format.

•

If the TV is NOT already in FTG Mode, you may need to perform some

manual configuration on the TV before you start this procedure (see

“Optional Manual Configuration / TV Setup” on next page).

•

If you intend to use the TV Zoning feature, make sure to assign the

appropriate TV Zone # as described in Reference section, “Using the TV

Zoning Feature,” BEFORE continuing with the procedure below.

Caution: Do not unplug the TV power cord or remove/disconnect

the USB memory device while Learning, as doing so may cause

the TV to malfunction or harm the USB device, respectively.

Learn FTG Configuration from Master TV

1. Turn ON the TV, and then insert a USB memory device into the USB port

on the Master TV.

2. Press

MENU

on the Installer Remote to display the TV setup menus (TV is

in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).

3. Use the arrow navigation keys to select/highlight either the

Option

icon from the TV setup menus or the

Lock

menu icon from the Function

Menu. Then, press the number “

” key a total of seven times to display the

TV Manager / USB Download Menu.

4. To gain access to the “Learn From TV” options in the TV Manager / USB

Download Menu, key in the following number sequence on the Installer

Remote:

5. Use the Up/Down arrow keys to select

Learn From TV (TLX)

, and then

press

FTG Mode of Operation (Cont.)

(Continued on next page)

Learn From TV (TLX)

Select the file name and press OK to start

xxLY560M-UA00005.TLX

►

Learn From TV (TLX)... 25 %

Do not remove the USB from the port! Do not unplug!

xxLY560M-UA00005.tlx

TV Manager

USB

Ez Download
Logo Image Download
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)
Teach To TV (TLL)

Learn From TV (TLX)

Learn From TV (TLL)

Summary of Contents for 22LY560M





















































































Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands

LG 22LY560M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands