manualshive.com logo in svg

Lexmark XM7100 Series, User Manual

The Lexmark XM7100 Series is a high-performance multifunction printer designed for busy work environments. For detailed instructions on how to operate this versatile device, simply download the User Manual for free from our website. Discover all the features and functionalities of the XM7100 Series with ease.

Share
Download
background image

Too many disks installed [58]

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet.

3

Remove the extra printer hard disks.

4

Connect the power cord to a properly grounded electrical outlet.

5

Turn the printer back on.

Too many flash options installed [58]

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet.

3

Remove the extra flash memory.

4

Connect the power cord to a properly grounded electrical outlet.

5

Turn the printer back on.

Too many trays attached [58]

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet.

3

Remove the extra trays.

4

Connect the power cord to a properly grounded electrical outlet.

5

Turn the printer back on.

Tray [x] paper size unsupported

Replace with a supported paper size.

Unformatted flash detected [53]

Try one or more of the following:

•

From the printer control panel, touch 

Continue

 to stop the defragmentation and continue printing.

•

Format the flash memory.

Note: 

If the error message remains, then the flash memory may be defective and needs to be

replaced.

Unsupported disk

Remove the unsupported printer hard disk, and then insert a supported one.

Troubleshooting

309

Summary of Contents for XM7100 Series





































































































































































































































































































































































































Reviews:

No comments

Related manuals for XM7100 Series

Saxxot CRU-158 Operation Manual preview
CRU-158
Brand: Saxxot Pages: 13
Samsung SPP 2020 - Photo Printer - 20 Sheets Manual Del Usuario preview
SPP 2020 - Photo Printer - 20 Sheets
Brand: Samsung Pages: 81
Samsung ML-6000 Bedienungsanleitung preview
ML-6000
Brand: Samsung Pages: 98
Samsung ML-4050N Compatibility Manual preview
ML-4050N
Brand: Samsung Pages: 6
Samsung ML-3750ND User Manual preview
ML-3750ND
Brand: Samsung Pages: 203
Samsung ML-3312ND Manual Del Usuario preview
ML-3312ND
Brand: Samsung Pages: 264
Samsung ML-2165W/XAA Manual Del Usuario preview
ML-2165W/XAA
Brand: Samsung Pages: 228
Samsung ML-2165 User Manual preview
ML-2165
Brand: Samsung Pages: 211
Samsung ML-2525 Brochure & Specs preview
ML-2525
Brand: Samsung Pages: 5
Samsung ML-1865W Manual Del Usuario preview
ML-1865W
Brand: Samsung Pages: 92
Samsung ML-1865W User Manual preview
ML-1865W
Brand: Samsung Pages: 75
Samsung ML-6060 Technical Instructions preview
ML-6060
Brand: Samsung Pages: 11
Samsung ML-1450 Series Manual Del Usuario preview
ML-1450 Series
Brand: Samsung Pages: 206
Samsung ML 3050 - B/W Laser Printer Manual Del Usuario preview
ML 3050 - B/W Laser Printer
Brand: Samsung Pages: 103
Samsung ML 3050 - B/W Laser Printer User Manual preview
ML 3050 - B/W Laser Printer
Brand: Samsung Pages: 215
Samsung ML-1450 Series Quick Manual preview
ML-1450 Series
Brand: Samsung Pages: 2
Samsung CLP 510N - Color Laser Printer User Manual preview
CLP 510N - Color Laser Printer
Brand: Samsung Pages: 266
Samsung 550N - CLP Color Laser Printer Manual De Instalación preview
550N - CLP Color Laser Printer
Brand: Samsung Pages: 296

Brands by name

Popular brands

Load more brands