Error reading USB hub. Remove hub.
An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
Fax memory full
1
From the control panel, touch
Continue
to clear the message and cancel the fax job.
2
Do the following:
•
Reduce the fax resolution.
•
Reduce the number of pages.
3
Send the fax job.
Fax partition inoperative. Contact system administrator.
Try one or more of the following:
•
From the printer control panel, touch
Continue
to clear the message.
•
Turn off the printer, and then turn it back on. If the message appears again, then contact your system
support person.
Fax server 'To Format' not set up. Contact system administrator.
Try one or more of the following:
•
From the printer control panel, touch
Continue
to clear the message.
•
Complete the Fax Server setup. If the message appears again, then contact your system support
person.
Fax Station Name not set up. Contact system administrator.
Try either of the following:
•
From the printer control panel, touch
Continue
to clear the message.
•
Complete the Analog Fax setup. If the message appears again after completing the setup, then contact
your system support person.
Fax Station Number not set up. Contact system administrator.
Try one or more of the following:
•
From the printer control panel, touch
Continue
to clear the message.
•
Complete the Analog Fax setup. If the message appears again after completing the setup, then contact
your system support person.
Imaging unit low [84.xy]
You may need to order a replacement imaging unit. If necessary, select
Continue
on the printer control
panel to clear the message and continue printing.
Troubleshooting
294
