Universal Setup menu
Use
To
Units of Measure
Inches
Millimeters
Identify the units of measure.
Notes:
•
Inches is the US factory default setting.
•
Millimeters is the international factory default setting.
Portrait Width
3–8.5 inches
76–216 mm
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the US factory default setting. You can increase
the width in 0.01
‑
inch increments.
•
216 mm is the international factory default setting. You can
increase the width in 1
‑
mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the US factory default setting. You can increase the
height in 0.01
‑
inch increments.
•
356 mm is the international factory default setting. You can
increase the height in 1
‑
mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction if the paper can be loaded in either
direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than
the maximum width supported in the tray.
Bin Setup menu
Use
To
Output Bin
Standard Bin
Bin [x]
Specify the default bin.
Notes:
•
If multiple bins are assigned the same name, then
the name appears only once in the menu.
•
Standard Bin is the factory default setting.
•
[x] can be any number between 1 and 4 if the
appropriate optional bins are installed.
Understanding the printer menus
161
