Lexmark XM3142, User Manual

Page: 76 / 273

Scan
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF) Scanner glass
•
Use the ADF for multiple
‑
page or two-sided
documents.
•
Load an original document faceup. For multiple
‑
page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
•
Use the scanner glass for single
‑
page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
Scanning to a computer
Before you begin, make sure that the computer and the printer are connected to the same network.
For Windows users
Using Lexmark ScanBack Utility
1
From the computer, run Lexmark ScanBack Utility, and then click Next .
Note: To download the utility, go to www.lexmark.com/downloads .
2
Click Setup , and then add the printer IP address.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
3
Click Close > Next .
4
Select the size of the original document, and then click Next .
5
Select a file format and scan resolution, and then click Next .
6
Type a unique scan profile name, and then click Next .
7
Browse to the location you want to save the scanned document, create a file name, and then click Next .
Note: To reuse the scan profile, enable Create Shortcut , and then create a unique shortcut name.
8
Click Finish .
Scan 76