Lexmark XM3142, User Manual

Page: 74 / 273

3
Touch Settings > Darkness > adjust the setting.
4
Send the fax.
Printing a fax log
Note: Make sure that analog fax or etherFAX is configured. For more information, see the Setting up the
printer to fax section.
1
From the home screen, touch Settings > Reports > Fax .
2
Touch Fax Job Log or Fax Call Log .
Blocking junk faxes
Note: Make sure that analog fax or etherFAX is configured. For more information, see the Setting up the
printer to fax section.
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls .
2
Set Block No Name Fax to On .
Holding faxes
Note: Make sure that analog fax or etherFAX is configured. For more information, see the Setting up the
printer to fax section.
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes .
2
Select a mode.
Forwarding a fax
Note: Make sure that analog fax or etherFAX is configured. For more information, see the Setting up the
printer to fax section.
1
Create a destination shortcut.
a
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
b
Click Shortcuts > Add Shortcut .
c
Select a shortcut type, and then configure the settings.
Note: Take note of the shortcut number.
d
Apply the changes.
2
Click Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls .
Fax 74