•
Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.
3
Apply the changes.
Creating a shortcut
1
From the home screen, touch
Shortcut Center
.
Note:
The icon and name may have been changed. For more information, contact your administrator.
2
Select a printer function, and then touch
Create Shortcut
.
Note:
The Secure E
‑
mail function is not supported.
3
Configure the settings, and then touch
Save
.
4
Type a unique shortcut name.
Note:
To avoid clipped names on the home screen, type only up to 25 characters.
5
Touch
OK
.
The application automatically generates a unique shortcut number.
Note:
To launch the shortcut, touch
, touch
#
, and then enter the shortcut number.
Setting up Card Copy
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Apps
>
Card Copy
>
Configure
.
Notes:
•
Make sure that Display Icon is enabled.
•
Make sure that E
‑
mail Settings and Network Share Settings are configured.
•
When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and
400 dpi for black and white.
•
When scanning multiple cards, make sure that the scan resolution does not exceed 150 dpi for color
and 300 dpi for black and white.
3
Apply the changes.
Note:
You need a printer hard disk or an intelligent storage drive to scan multiple cards.
Set up, install, and configure
23
