Lexmark XM3142 User Manual Download Page 212

Page: 212 / 273

Action

Yes

Step 5

Check if the ﬂash drive is supported. For more information, see

“Supported ﬂash drives and ﬁle types” on page 65

Is the ﬂash drive supported?

Go to step 7.

Go to step 6.

Step 6

Insert a supported ﬂash drive.

Does the printer recognize the ﬂash drive?

The problem is
solved.

Go to step 7.

Step 7

Remove, and then insert the ﬂash drive.

Does the printer recognize the ﬂash drive?

The problem is
solved.

Contact

customer

support

Enabling the USB port

From the home screen, touch

Settings

Network/Ports

USB

Enable USB Port

Clearing jams

Avoiding jams

Load paper properly

•

Make sure that the paper lies ﬂat in the tray.

Correct loading of paper Incorrect loading of paper

•

Do not load or remove a tray while the printer is printing.

•

Do not load too much paper. Make sure that the stack height is below the maximum paper ﬁll indicator.

Troubleshoot a problem

212

Summary of Contents for XM3142


















































































































































































































































































Search results

Summary of Contents for XM3142

Reviews:

Related manuals for XM3142

Brands by name

Popular brands

Lexmark XM3142, User Manual

Search results

Summary of Contents for XM3142

Reviews:

Related manuals for XM3142

Brands by name

Popular brands