Lexmark XC9225 User Manual Download Page 281

Page: 281 / 338

Unpack the optional card.

Warning—Potential Damage:

Avoid touching the connection points along the edge of the card.

Push the card ﬁrmly into place.

Note:

The entire length of the connector on the card must touch and be ﬂush against the controller

board.

Warning—Potential Damage:

Improper installation of the card may cause damage to the card and the

controller board.

Attach the shield, and then attach the access cover.

Attach the connector cover.

If you removed a ﬁlter cover, then attach the cover.

Connect the power cord to the electrical outlet, and then turn on the printer.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Upgrading and migrating

281

Summary of Contents for XC9225



















































































































































































































































































































































Search results

Summary of Contents for XC9225

Reviews:

Brands by name

Popular brands

Lexmark XC9225, User Manual

Search results

Summary of Contents for XC9225

Reviews:

Brands by name

Popular brands