Fax Settings menu
Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job through a telephone line.
General Fax Settings
Use
To
Restore Factory Defaults
Restore the factory defaults of all fax settings.
Optimize Fax Compatibility
Optimize fax compatibility with other fax machines.
Fax Name
Specify the name of the fax in the printer.
Fax Number
Specify the telephone number assigned to the fax.
Fax ID
Fax Name
Fax Number
Specify how the fax is identified.
Note:
Fax Number is the factory default setting.
Enable Manual Fax
On
Off
Set the printer to fax manually, which requires a line splitter and a telephone handset.
Notes:
•
Off is the factory default setting.
•
Use a regular telephone to answer an incoming fax job and to dial a fax
number.
•
Press
# 0
on the numeric keypad to go directly to the Manual Fax function.
Memory Use
All receive
Mostly receive
Equal
Mostly send
All send
Define the allocation of non-volatile memory between sending and receiving fax jobs.
Note:
Equal is the factory default setting.
Cancel Faxes
Allow
Don't Allow
Specify whether canceling of fax jobs is allowed.
Note:
Allow is the factory default setting.
Caller ID
Off
Primary
Alternate
Specify the type of caller ID being used.
Fax number masking
Off
From left
From right
Specify the direction from where digits are masked in an outgoing fax number.
Notes:
•
Off is the factory default setting.
•
The number of characters masked is determined by the Digits to Mask setting.
Digits to Mask
0–58
Specify the number of digits to mask in an outgoing fax number.
Note:
0 is the factory default setting.
Understanding the printer menus
157
