Lexmark XC2132 User Manual Download Page 264

Page: 264 / 342

Weblink server not set up. Contact system administrator.

An error occurred on the Weblink server, or the server is not configured properly. Touch

Continue

to clear the message.

If the message appears again, contact your system support person.

Solving printer problems

Basic printer problems

Printer display is blank

Action

Yes

Step 1

Press the Sleep button on the printer control panel.

Does

Ready

appear on the printer display?

The problem is solved. Go to step 2.

Step 2

Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.

Please wait

and

Ready

appear on the printer display?

The problem is solved. Turn off the printer,

and then contact

customer support

The printer is not responding

Action

Yes

Step 1

Make sure the printer is turned on.

Is the printer turned on?

Go to step 2.

Turn on the printer.

Step 2

Check if the printer is in Sleep mode or Hibernate mode.

Is the printer in Sleep mode or Hibernate mode?

Press the Sleep button
to wake the printer
from Sleep mode or
Hibernate mode.

Go to step 3.

Step 3

Check if one end of the power cord is plugged into the printer and the
other to a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded
electrical outlet?

Go to step 4.

Plug one end of the
power cord into the
printer and the other to
a properly grounded
electrical outlet.

Troubleshooting

264

Summary of Contents for XC2132























































































































































































































































































































































Search results

Summary of Contents for XC2132

Reviews:

Related manuals for XC2132

Brands by name

Popular brands

Lexmark XC2132, User Manual

Search results

Summary of Contents for XC2132

Reviews:

Related manuals for XC2132

Brands by name

Popular brands