Lexmark XC2132 User Manual Download Page 133

Page: 133 / 342

Use

Print Setup Page

Print a report containing information about the network printer settings, such as the TCP/IP address.

Network Card menu

To access the menu, navigate to either of the following:

•

Network/Ports

Standard Network

Standard Network Setup

Network Card

•

Network/Ports

Network [x]

Network [x] Setup

Network Card

Use

View Card Status

Connected
Disconnected

View the connection status of the wireless network adapter.

View Card Speed

View the speed of an active wireless network adapter.

Network Address

UAA
LAA

View the network addresses.

Job Timeout

0, 10–225 seconds

Set the amount of time it takes for a network print job to be canceled.

Notes:

•

“90 seconds” is the factory default setting.

•

A setting value of 0 disables the timeout.

•

If a value between 1 and 9 is selected, then

Invalid

appears on the

display, and the value is not saved.

Banner Page

Off
On

Allow the printer to print a banner page.

Note:

Off is the factory default setting.

TCP/IP menu

To access the menu, navigate to either of the following:

•

Network/Ports

Standard Network

Standard Network Setup

TCP/IP

•

Network/Ports

Network [x]

Network [x] Setup

TCP/IP

Note:

This menu is available only in network printers or printers that are attached to print servers.

Use

Set Hostname

Set the current TCP/IP hostname.

IP Address

View or change the current TCP/IP address.

Note:

Manually setting the IP address sets the Enable DHCP and Enable Auto IP

settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.

Netmask

View or change the current TCP/IP netmask.

Gateway

View or change the current TCP/IP gateway.

Understanding the printer menus

133

Summary of Contents for XC2132























































































































































































































































































































































Search results

Summary of Contents for XC2132

Reviews:

Related manuals for XC2132

Brands by name

Popular brands

Lexmark XC2132, User Manual

Search results

Summary of Contents for XC2132

Reviews:

Related manuals for XC2132

Brands by name

Popular brands