Custom Scan Sizes menu
Use
To
Custom Scan Size [x]
Scan Size Name
Width
Height
Orientation
2 scans per side
Off
On
Specify a custom scan size name, size, and page orientation.
Notes:
•
8.5 inches is the U.S. factory default setting for Width. 216 mm is the
international factory default setting for Width.
•
14 inches is the U.S. factory default setting for Height. 356 mm is the
international factory default setting for Height.
•
Portrait is the factory default setting for Orientation.
•
Off is the factory default setting for 2 scans per side.
Universal Setup menu
Use
To
Units of Measure
Inches
Millimeters
Identify the units of measure.
Notes:
•
Inches is the US factory default setting.
•
Millimeters is the international factory default setting.
Portrait Width
3–8.5 inches
76–216 mm
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the US factory default setting. You can increase the
width in 0.01
‑
inch increments.
•
216 mm is the international factory default setting. You can increase
the width in 1
‑
mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the US factory default setting. You can increase the
height in 0.01
‑
inch increments.
•
356 mm is the international factory default setting. You can increase
the height in 1
‑
mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction if the paper can be loaded in either direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
Understanding the printer menus
129
