Lexmark X500N, Service Manual

Page: 26 / 244

1-6
Service Manual
7100-XXX
Print engine specifications
Print engine resolution
600 x 600 dpi, 1200 x 600 dpi
Color balance settings
This MFP offers color balance control. It is a color correction option that allows you to increase or decrease
the amount of toner going to the page for all four color planes. The scale ranges from -10 to +10.
Emulations
Raster Graphics (CMYK bi-tone JBIG Compressed)
Print engine speed and performance
Print engine time to first print
Pages/minute)
Media size Standard tray
Mono Color
Letter Up to 31 Up to 8
A4 Up to 31 Up to 8
Legal Up to 16 Up to 8
Transparencies Up to 3 Up to 2
Thick card stock Up to 3 Up to 2
Labels (letter &
A4) Up to 5 Up to 3
Medium thick card
stock (letter & A4) Up to 4 Up to 3
Envelopes Up to 5 Up to 3
Media type/Media size First print time
Mono Color
Plain paper mode / A4, letter 13 seconds 19 seconds
Transparency mode / A4, letter 23 seconds 29 seconds
Label–middle thickness stock / A4, letter 17 seconds 23 seconds
Middle thick stock–glossy / A4, letter 16 seconds 22 seconds
Thick stock / A4, letter 23 seconds 29 seconds
Envelope (1) mode / Commercial #10, International DL 18 seconds 24 seconds
Envelope (2) mode / Commercial #10, International DL 23 seconds 29 seconds
Note: Note: Time to first page (TTFP) is the time from the moment when the host sends the print signal
until the moment the trailing edge of the first page leaves the exit feed rollers. TTFP is measured using a
simple text (single character) page.
Note: Note: Warm up time, 60 seconds maximum, is the time elapsed from when the power is turned on
to when the Ready status is reached.