Lexmark X500N Service Manual Download Page 200

Page: 200 / 244

5-2

Service Manual

7100-XXX

Part name

Description

Paper stopper

Stopper for exited papers.

Top cover assembly

Upper enclosure and also the paper exit tray.

Rear cover assembly

Printer rear enclosure that opens allowing clearing of internal paper
jams or maintenance work.

Release lever (rear cover assembly)

Releases rear cover assembly.

Release lever (top cover assembly)

Releases the opening portion of the top cover assembly. Opening the
top cover assembly allows access to the photodeveloper unit.

Right cover

Covers the right side of the printer where the motors and drives are
located.

Front cover

Printer front enclosure that opens allowing toner cartridge or waste
toner bottle replacement.

Paper tray

Standard paper tray that holds printer paper.

Left front cover

Covers the left side of the printer over the MFP engine card.

Left rear cover

Covers the left side of the printer over the RIP card.

Power switch

Turns the printer on and off.

Upper left cover

Covers the fuser fan.

USB connection

Connects the MFP to the host by USB.

Network connection

Connects the printer to an 10/100/1000 base T network.

AC input inlet

Connects the power cord that supplies AC power to the printer.

Summary of Contents for X500N





















































































































































































































































Search results

Summary of Contents for X500N

Reviews:

Related manuals for X500N

Brands by name

Popular brands

Lexmark X500N, Service Manual

Search results

Summary of Contents for X500N

Reviews:

Related manuals for X500N

Brands by name

Popular brands