Lexmark X500N Service Manual Download Page 183

Page: 183 / 244

Repair information

4-43

7100-XXX

5. Slide the left tray guide assembly out in front of the MFP.

Modem speaker removal

1. Remove the left rear cover.

2. Remove the top cover.

3. Disconnect the modem speaker cable from the system / RIP board.

4. Remove the old speaker from the interlock assembly by prying the speaker retaining tabs back, and

sliding the speaker out of the interlock assembly.

Fuser fan assembly removal

1. Remove the left rear cover. See

“Left rear cover removal” on page 4-16

2. Remove the top cover. See

“Top cover assembly removal” on page 4-10

3. Remove the system board. See

“System board removal” on page 4-36

4. Remove the screw (A) that secures the interlock assembly to the printer engine frame. Set the interlock

assembly aside.

Summary of Contents for X500N





















































































































































































































































Search results

Summary of Contents for X500N

Reviews:

Related manuals for X500N

Brands by name

Popular brands

Lexmark X500N, Service Manual

Search results

Summary of Contents for X500N

Reviews:

Related manuals for X500N

Brands by name

Popular brands