Lexmark X500N Service Manual Download Page 243

Page: 243 / 244

Part number index

I-5

7100-XXX

Part number index

P/N

Description

page

14D0403

Cable, USB, 2-meter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-19

40X0273

Power cord, HV, Chile - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X0274

Power cord, HV, Switzerland French, Switzerland German, Switzerland Italian - - - - - - - - - - - - - - - - - - - 7-3

40X0275

Power cord, HV, Israel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X0276

Power cord, HV, South Africa - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X0278

Power cord, HV, Austria, Belgium, Euro English, Finland, France, Germany, Greece, Netherlands, Norway,
Poland, Portugal, Russia, Slovakia/Czech/Hungary, Spain, Sweden, Turkey - - - - - - - - - - - - - - - - - - - - 7-3

40X0279

Power cord, HV, Denmark - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X0286

Power cord, HV, UK, Ireland - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X0287

Power cord, HV, Italy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X0297

Power cord, USA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X0301

Power cord, HV, Argentina - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X1766

Power cord, LV, USA, APG, Bolivia, Canada, Columbia, Costa Rica, Ecuador, El Salvador, Guatemala,
Honduras, Mexico, Nicaragua, Panama, Peru, Venezuela - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X1767

Power cord, HV, Brazil - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X3382

Roller, cleaning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X3383

Cover, cleaning roller - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X3385

Cover, right - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-5

40X3387

Cover, inner front - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-5

40X3388

Cover, front - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-5

40X3389

Motor assembly, main - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3390

Clutch, paper feed - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3391

Clutch, registration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3393

Clutch, transfer roller - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3394

Clutch, cleaning roller - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3395

Gear assembly, main drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3396

Waste toner feeder - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3397

Drive assembly, developer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3398

Assembly, waste toner holder - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3399

Sensor, toner, receiver TTR (This is a two-piece sensor system. Ordering of this part number includes both the
right and left side.) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-15

40X3399

Sensor, toner, sender TPD (This is a two-piece sensor system. Ordering of this part number includes both the
right and left side.) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3400

Laser unit assembly (printhead) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-9

40X3401

Right tray guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-9

40X3402

Auger, waste toner - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-17

40X3403

Agitator, waste toner - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-17

40X3405

Power supply, high voltage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-15

40X3410

Sensor, toner present - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-15

40X3412

Transfer unit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X3413

Paper guide (C) assembly (includes registration sensor, tray empty sensor) - - - - - - - - - - - - - - - - - - - - 7-13

40X3414

Roller, paper feed - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-13

40X3415

Pad, separator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-13

40X3416

Lamp, erase - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-9

40X3418

Transfer roller assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

40X3420

Packet, parts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-5

40X3421

Assembly, secondary paper feed - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-19

40X3428

Assembly, paper exit (contains fuser exit sensor and flag) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-5

40X3429

Assembly, bracket (includes marker sensor (transfer belt unit), toner density sensor) - - - - - - - - - - - - - 7-13

40X3430

Assembly, registration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-5

40X3431

Left tray guide assembly (includes paper size sensor and temperature thermistor) - - - - - - - - - - - - - - - - 7-9

40X3432

Assembly, interlock switch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-11

40X3433

Paper guide assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-13

40X3434

Assembly, marker sensor (OPC) (includes bracket) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-17

Summary of Contents for X500N





















































































































































































































































Search results

Summary of Contents for X500N

Reviews:

Related manuals for X500N

Brands by name

Popular brands

Lexmark X500N, Service Manual

Search results

Summary of Contents for X500N

Reviews:

Related manuals for X500N

Brands by name

Popular brands