Lexmark X500N Service Manual Download Page 171

Page: 171 / 244

Repair information

4-31

7100-XXX

Paper guide assembly removal

1. Remove the registration assembly. See

“Registration assembly removal” on page 4-33

2. Remove two screws (A) that attach the paper guide assembly to the MFP. Screws are located in holes.

3. Lift and remove the paper guide assembly (B) from the MFP.

Paper guide C assembly removal

1. Remove the paper guide assembly. See

“Paper guide assembly removal” on page 4-31

2. Remove the transfer belt unit. See

“Transfer belt unit removal” on page 4-5

3. Remove the support pin, disconnecting the support cable (A) from the MFP.

4. Remove the two screws (B) that attach the paper guide C assembly to the MFP.

5. Disconnect two sensor cables from the sensors located on the paper guide C assembly, and remove

the paper guide C assembly.

Summary of Contents for X500N





















































































































































































































































Search results

Summary of Contents for X500N

Reviews:

Related manuals for X500N

Brands by name

Popular brands

Lexmark X500N, Service Manual

Search results

Summary of Contents for X500N

Reviews:

Related manuals for X500N

Brands by name

Popular brands