Lexmark Optra M410 Page 288 User Manual Download

Page: 288 / 312

276

Glossary

lines per page (lpp).

The number of lines of text that can

be printed on one page.

link.

The connection between the computer system or

local area network and the printer.

liquid crystal display (LCD).

The display technology that

shows operator panel messages and menu selections.

local area network (LAN).

A computer network located

on a user’s premises within a limited geographical area.

long-edge binding.

A printer setting that arranges the

orientation and layout of a duplexed page to be bound
along the long side of the page.

LPTx.

A representation of one of the logical parallel ports

(for example, LPT1) on a personal computer.

macro.

A collection of commands grouped together and

temporarily or permanently stored in printer memory.

manual feed.

A process of feeding print material (paper,

envelope, label, transparency, card stock) into the
multipurpose feeder on the printer one sheet at a time.

MarkNet S.

Family of multi-protocol Lexmark internal

print servers. Ethernet and Token-Ring versions are
available.

MarkNet XLe.

Family of multi-protocol Lexmark external

print servers. Ethernet, Token-Ring, and LocalTalk
versions are available.

MarkVision.

A printer utility that provides continuous

printer status and lets you configure multiple printers
from a single setup file.

MB.

Megabyte; 1,048,576 bytes.

media.

See print material.

Summary of Contents for Optra M410

























































































































































































































































































































Search results

Summary of Contents for Optra M410

Reviews:

Related manuals for Optra M410

Brands by name

Popular brands

Lexmark Optra M410, User Manual

Search results

Summary of Contents for Optra M410

Reviews:

Related manuals for Optra M410

Brands by name

Popular brands