Lexmark Optra M410 Page 139 User Manual Download

Page: 139 / 312

127

Loading Print Material

Flex the sheets back and forth to loosen them, then
fan them.

Do not fold or crease the print material.

Straighten the edges on a level surface.

Place the print material against the left side of the
input tray and insert it under the metal stop.

Make sure the recommended print side is face down
and the front edge is placed toward the front of the
input tray.

For information on loading letterhead, see “Printing
on Letterhead” on page 135.

Note:

Make sure the print

material fits easily under the
metal stop and is not bent or
wrinkled. Do not raise the metal
stop or force print material under
the metal stop.

Metal Stop

Summary of Contents for Optra M410

























































































































































































































































































































Search results

Summary of Contents for Optra M410

Reviews:

Related manuals for Optra M410

Brands by name

Popular brands

Lexmark Optra M410, User Manual

Search results

Summary of Contents for Optra M410

Reviews:

Related manuals for Optra M410

Brands by name

Popular brands