Lexmark Optra M410 Page 231 User Manual Download

Page: 231 / 312

219

Removing an Option Card

Removing an

Option Card

Before removing an option card, follow the steps under
“Accessing the Printer System Board” on page 201.

Warning!

The option card is

easily damaged by static elec-
tricity. Touch something metal
before you touch the card.

To remove an option card:

Remove the two screws on either side of the con-
nector slot located on the back of the printer.

Pull the option card straight out of the system
board connector.

Place the option card in its original packaging.

If you did not save the packaging, wrap the card in
paper and store it in a box.

Follow the steps under “Installing an
Option Card” on page 216 if you need to install an
option card. Otherwise, go to step 5.

Continue with “Closing the Printer System Board”
on page 220.

Summary of Contents for Optra M410

























































































































































































































































































































Search results

Summary of Contents for Optra M410

Reviews:

Related manuals for Optra M410

Brands by name

Popular brands

Lexmark Optra M410, User Manual

Search results

Summary of Contents for Optra M410

Reviews:

Related manuals for Optra M410

Brands by name

Popular brands