Diagnostic aids
3-7
4513-420, -430
Quick Test page
Print a Quick Test page to verify that the
REGISTRATION
margin values are set appropriately. The
Quick Test
page consists of the following:
•
Alignment diamonds
•
Horizontal lines used for skew adjustment
•
General device information (current page count, installed memory, etc.)
•
The printer’s serial number, code levels, and print registration settings
While the Quick Test page prints,
Printing...
will display. No buttons are active while the Quick Test page
prints. When the Quick Test page is finished printing, the display returns to the initial
REGISTRATION
menu
screen.
Note:
Print the Quick Test page on Letter- or A4-sized media.
Print tests
This setting tests the printer’s ability to generate printed output from each of its installed input sources and to
test the printer’s current print quality.
Input sources
PRINT TESTS
contains the following installed input sources:
•
Tray1
•
Manual Feeder
•
MP Feeder
Press
or
to scroll through the
PRINT TESTS
menu, and then press
to select the desired input source.
Single
or
Continuous
is displayed on the screen. A Single test feeds one sheet of media from the selected
input and prints a test page on it. No buttons are active during the Single test. The Continuous test feeds media
from the selected input and prints test pages until
is pressed. The printer always generates a simplexed
version of the Print Test page in its default resolution. While the Single or Continuous tests print,
Printing...
will display. After the Single test prints or the Continuous test is canceled, the display returns to the
TESTS
menu screen.
Note:
The type of media installed in the selected input source will affect the contents of the page.
Print Quality Pages (Prt Quality Pgs)
This setting reports the values of a broad range of printer settings and tests the printer’s ability to generate
acceptable printed output. Press
to print the report.
Printing Quality Test Pages
will display. Once
started, the printing cannot be canceled and no buttons are active until the printing completes.
Summary of Contents for E360D series
