Lexmark E360D series, Service Manual

Page: 69 / 166

Diagnostic aids
3-9
4513-420, -430
Duplex tests
The following tests are used to determine if the duplex is working correctly:
•
Quick Test
•
Top Margin
•
Left Margin
•
Sensor Test
•
Duplex Feed 1
Quick Test
The Quick Test contains the following information on a duplexed page:
•
Print registration settings
•
Alignment diamonds at the top and bottom
•
Horizontal lines to check for skew
•
General printer information, including current page count, installed memory, serial number,
and code level.
To print the duplexed Quick Test page:
1.
Select
Quick Test
from the
DUPLEX TESTS
menu.
2.
Select
Single
or
Continuous
by pressing or .
3.
Press to print the page.
Top Margin
1.
Select
Top Margin
from the
DUPLEX TESTS
menu.
2.
To change the margin value, press to increase the value or to decrease the value.
3.
Press to save the desired margin value.
Left Margin
1.
Select
Left Margin
from the
DUPLEX TESTS
menu.
2.
To change the margin value, press to increase the value or to decrease the value.
3.
Press to save the desired margin value.
Sensor Test
This test is used to determine if the input sensor is operating correctly.
•
If the sensor is operating correctly, then
OP
(Open) will appear on the display:
•
Press to return to the
DUPLEX TESTS
menu.
Sensor Test
Input=OP