Lexmark E360D series, Service Manual

Page: 144 / 166

4-66
Lexmark™ E360d, E360dn
4513-420, -430
Wear strip (550-sheet tray 2) removal
1.
Use a spring hook to disconnect the strip from the top of the tray.
2.
Life the strip, and remove.
Note:
When replacing the strip (for all trays):
•
Carefully insert the strip from the top of the tray, and push it down through the opening until it snaps
into place.
•
Turn the tray over to view the bottom of the strip. Using the spring hook, check to make sure that the
end of the strip is fastened tightly.
•
Be sure that the drafted edge of the strip is installed toward the bottom of the tray.