Lexmark 5060-00x, Service Manual

Page: 47 / 490

Diagnostic information
2-13
5060-00 x
128 Fuser Error Fuser under temperature in standby—hot roll. Go to “128 Error code”
on page 2-48 .
129 Fuser Error Fuser under temperature in standby—BUR. Go to “129 Error code” on
page 2-49 .
130 Fuser Error Fuser failed to reach standby temperature—hot roll. Go to “130 Error
code” on page 2-50 .
131 Fuser Error Fuser failed to reach standby temperature—BUR. Go to “131 Error
code” on page 2-51 .
132 Fuser Error Fuser cold hot roll. Go to “132 Error code” on page 2-52 .
133 Fuser Error Fuser cold roll—BUR. Go to “133 Error code” on page 2-53 .
134 Fuser Error Fuser lamp on too long—hot roll. Go to “134 Error code” on page 2-54 .
135 Fuser Error Fuser lamp on too long—BUR. Go to “135 Error code” on page 2-55 .
136 Fuser Error Fuser cam position not found—go to “136 Error code” on page 2-56 .
140 Motor DC motor accel stall—registration. Replace the registration motor
assembly. See
“Registration motor” on page 4-64 .
If this does not fix the problem, replace the engine board. See “Engine
board removal” on page 4-29 .
141 Motor DC pick motor excessive PWM—registration motor—replace the
registration motor. See
“Registration motor removal” on page 4-69 .
If this does not fix the problem, replace the engine board. See “Engine
board removal” on page 4-29 .
142 Motor DC pick motor, over speed–registration motor—replace the registration
motor assembly. See
“Registration motor removal” on page 4-69 .
If this does not fix the problem, replace the engine board. See “Engine
board removal” on page 4-29 .
143 Motor DC pick motor, no encoder feedback–registration motor—replace the
registration motor assembly. See
“Registration motor removal” on
page 4-69 .
If this does not fix the problem, replace the engine board. See “Engine
board removal” on page 4-29 .
144 Motor DC motor accel stall–autocompensator motor—replace the
autocompensator assembly. See
“Autocompensator pick assembly
removal” on page 4-17 .
If this does not fix the problem, replace the engine board. See “Engine
board removal” on page 4-29 .
145 Motor DC motor excessive PWM–autocompensator motor—replace the
autocompensator assembly. See
“Autocompensator pick assembly
removal” on page 4-17 .
If this does not fix the problem, replace the engine board. See “Engine
board removal” on page 4-29 .
146 Motor DC motor over speed–autocompensator motor—replace the
autocompensator assembly. See
“Autocompensator pick assembly
removal” on page 4-17 .
If this does not fix the problem, replace the engine board. See “Engine
board removal” on page 4-29 .
Error code Action