Lexmark 5060-00x, Service Manual

Page: 210 / 490

3-26
Service Manual
5060-00 x
Sensor Test
This test verifies if the output bin sensors are working correctly.
The following Output options, if installed, are supported by this test.
Standard Bin
Output Expander
5-Bin Mailbox
To run the Output Bin Sensor Test:
1.
Select Sensor Test from the menu.
2.
Select the bin you want to test.
•
If Standard Bin is selected the following is displayed.
•
If Output Expander is selected the following is displayed:
•
If 5-Bin Mailbox is selected the following is displayed:
3.
Once the selection is displayed you can manually actuate the sensor you want to test. When the sensor is
closed (CL) displays, and when the sensor is open (OP) displays.
4.
To exit the test press Return or Stop .
Standard Bin
F =OP
F =Standard Bin Output Bin Full Sensor
< output bin >
P =OP F =OP NF =OP
P =Output Expander Pass Thru Sensor.
F =Output Expander Full Sensor
NF =Output Expander Near Full Sensor.
< output bin >
P 1=OP P2 =OP L =NL
P1 =5-Bin Mailbox first Pass Thru Sensor.
P2 =5-Bin Mailbox second Pass Thru Sensor.
L =5-Bin Mailbox output level sensor where:
EM indicates the bin is empty.
NL indicates the bin contains media but the bin is not
near full nor full.
NF indicates the bin is near full.
FL indicates the bin is full.