Lexmark 5060-00x, Service Manual

Page: 193 / 490

Diagnostic aids
3-9
5060-00 x
TYPE SENSING
Only paper sources that support Auto Type Sensing are displayed.
1.
Select TYPE SENSING from the CONFIG MENU.
2.
Select a tray. Only those trays with type sensing display. These can include:
3.
Select Auto to turn type sensing on for that tray, or select Off to disable type sensing.
4.
Select Return to exit.
SENSED TRANS
1.
Select SENSED TRANS from the CONFIG MENU.
2.
Select the tray. Only those trays with
SENSED PAPER
Only paper sources that support auto type sensing are displayed. The factory default paper type or each tray is
determined by the value of Configuration ID.
For example, the default values may be as follows:
The following media can be sensed by Tray 1, Tray 2, Tray 3, and Tray 4:
Plain Paper, Glossy Paper, Card Stock, Labels, Bond, Letterhead, Preprinted, Colored paper, Custom Type
1, Custom Type 2, Custom Type 3, Custom Type 4, or Custom Type 6
CALIBRATE TRAYS
Only trays that support transparency sensing are displayed.
The following are displayed whenever a tray has been detected that is not calibrated.
This message usually indicates a user-correctable NVRAM problem. The tray may not have been
calibrated or the NVRAM variable for tray calibration may be missing.
Tray 1
Tray 2
Tray 3
Tray 4
Tray 1 factory default paper type = Plain Paper
Tray 2 factory default paper type = Plain Paper or Custom Type 2
Tray 3 factory default paper type = Plain Paper or Custom Type 3
Tray 4 factory default paper type = Plain Paper or Custom Type 4
Tray x
Not Calibrated