Lexmark 5060-00x, Service Manual

Page: 75 / 490

Diagnostic information
2-41
5060-00 x
64 Unsupported Disk
Format This message is displayed when the printer detects an
unsupported disk format at POST. This message may
appear if the disk was formatted on another system with a
different format.
Press Go to clear the message.
The disk is marked as bad and normal operation continues,
however disk operations is not allowed until the disk is
formatted.
80 Fuser
Maintenance 83 ITU
Maintenance These messages are displayed when the printer requires
replacement of some worn assemblies. These messages
are independently posted when either the ITU or Fuser need
to be replaced. Press
Go to clear this message.
81 Engine Code CRC
Failure This message is displayed when microcode programmed
into the engine flash code fails a CRC check.
Press Go to clear the message.
The code data is discarded and must be resent from the
host computer.
82 Waste Toner
Bottle Full This message is displayed when the waste container is full.
Replace the waste container and press Go .
82 Waste Toner
Bottle Missing This message is displayed when the waste container is
missing.
Insert the waste container and press Go .
82 Waste Bottle
Nearly Full This message is displayed when the waste container is
nearly full.
Press Go
Nearly Full appears in the Supplies Menu.
84 Replace Oiler This message is displayed when the web oiler is exhausted
or missing. Replace the web oiler. See
“Fuser web oiler
motor assembly removal” on page 4-35 .
84 Oiler Nearly
Exhausted This message is displayed when the Wed Oiler is nearly
exhausted. Press
Go to continue or replace the web oiler.
See “Fuser web oiler motor assembly removal” on
page 4-35 .
87 Fuser Missing This message is displayed when the engine detects the
fuser is missing.
Turn the printer off and insert the fuser assembly.
88 Yellow Toner Low
88 Magenta Toner
Low 88 Cyan Toner
Low
88 Black Toner Low These messages are displayed when either the yellow,
magenta, cyan, or black toner cartridge is low on toner.
The following actions can be taken:
• Open the front door, remove the old toner cartridge,
insert a new toner cartridge, and close the door
or
• Press Go without changing the toner cartridge and
continue.
1565 Emul Error Load
Emul Option This message appears when the IPDS emulation version
contained in the SIMM does not function with the printer
code. This message automatically clears in 30 seconds, and
the IPDS emulation is disabled. No other printer functions
are affected. The correct IPDS emulation must be
downloaded.
User primary
message User secondary
message
Explanation