Lexmark 13B0500 User Manual Download Page 186

Page: 186 / 234

294 ADF Jam

This jam location may also be identified as

294.04 Duplex Sensor Off Jam

294.05 Scan Sensor Off

Jam

, or

294.06 ADF Backfeed Jam

. To clear this jam:

Remove all pages from the ADF.

Note:

The message clears when the pages are removed from the ADF.

Flex and fan the pages.

Place the pages in the ADF.

Adjust the ADF guides.

From the printer control panel, press

840.01 Scanner Disabled

This message indicates that the scanner has been disabled by the system support person.

840.02 Scanner Auto Disabled

This message indicates the printer identified a problem with the scanner and automatically disabled it.

Remove all pages from the ADF.

Turn the printer off.

Wait 15 seconds, and then turn the printer on.

Place the document in the ADF.

Press

Note:

If turning the printer off and then on again does not clear the message, then contact your system support

person.

Solving printing problems

Jobs do not print

These are possible solutions. Try one or more of the following:

AKE

SURE

THE

PRINTER

READY

PRINT

Make sure

Ready

Power Saver

appears on the display before sending a job to print.

HECK

SEE

THE

STANDARD

EXIT

BIN

FULL

Remove the stack of paper from the standard exit bin.

HECK

SEE

THE

PAPER

TRAY

EMPTY

Load paper in the tray.

Troubleshooting

186

Summary of Contents for 13B0500











































































































































































































































Search results

Summary of Contents for 13B0500

Reviews:

Related manuals for 13B0500

Brands by name

Popular brands

Lexmark 13B0500, User Manual

Search results

Summary of Contents for 13B0500

Reviews:

Related manuals for 13B0500

Brands by name

Popular brands