Try one or more of the following:
•
Press
to clear the message and continue printing.
•
Turn the power off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
54 Standard network software error
Try one or more of the following:
•
Press the arrow buttons until
Continue
appears, and then press
to continue printing.
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
56 Standard USB port disabled
Try one or more of the following:
•
The printer discards any data received through the USB port. Press
to clear the message and continue printing.
•
Make sure the USB Buffer menu item is not set to Disabled.
58 Too many flash options installed
Try one or more of the following:
•
Turn the printer off, and then remove extra flash options:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess flash memory.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
•
Press
to clear the message and continue printing.
58 Too many trays attached
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
84 PC Kit life warning
The photoconductor kit is near exhaustion.
Try one or more of the following:
•
Replace the photoconductor kit.
•
Press
to clear the message and continue printing.
Troubleshooting
182
