Lexicon 300, Owner'S Manual

Page: 103 / 155

5-11
The Presets
P220 DM:MyGuitar
EA:802 Guit Shift EB:614 Env:Peak
Great stuff for either a mono or stereo guitar. Machine B should get a very strong, if not a total, pre-fade signal.
MchA EA:802 Guitar Shift This preset offers a moderate amount of micropitch shift(-14c), along with a small amount of
recirculating predelay. Raunchy sounding on beefy” guitars.
MchB EB:614 Env:Peak This preset is similar to an OverTheTop type of effect, except the flange delay is patched to the
meter balistics. Depending on the dynamics of your guitar playing, you may wish to adjust the scaling parameter which is
found in the Mod Edit patch.
P221 DM:EnvSpooge
EA:614 Env:Peak EB:608 Env:Phazer
This preset uses two effects which have meter ballistics patched to the flange glide delays, with a twist: the Machine A Mod
Edit patch gets its modulation information from the R-meter; the Machine B flange glide Mod patch is specified to modulate
from the ballistics of the L-meter. One input modulates the other — A T-shirt to the engineer who gets the most creative.
MchA EP:614 Env:Peak This preset is similar to an OverTheTop type effect except the flange delay is patched to meter
ballistics. Some modification of the scaling parameter in the Mod Edit patch may be nessessary to suit Machine B ballistics.
MchB EP:608 Env:Phazer This preset makes use of a patch between the L-Meter and the flange glide delay. As signal
becomes stronger, the glide delay drops in the time domain, eventually crossing the 5.2ms base delays. As audio signal
strength lessens, the glide returns to its preset value of 10ms. Very good on vocals. To make this effect work properly, be
sure to drive the 300 to within 12dB of full scale (dBfs).
Remember, in this setup the effects are reversed from the meter
ballistics which drive them. Good Luck!!!
P222 DM:Flng&Dlys
EA:615 Negative Flang EB:602 Space Dlys
This is a true Dual Mono Setup. The Setup LFO is set to 0.6Hz with a triangle waveform. It drives the flange glide delay (FDLY)
in Machine A.
MchA EA:615 NegativeFlng This is a really stiff flange which goes almost 20ms deep. Flange gain is set extremely
negative, so the sound is tunnel-like.
MchB EB:602 Space Delays This preset incorporates a bit of multi-diffused delays along with some small delay offsets
between the post delay outputs. If the effect is too strong, try lowering feedback levels for delays 3 and 4. You may hear a
kind of resonant “tuning” to the return signal. This is because the flange delay has gain (LFLG and RFLG) in the circuit, but
it is not patched to the LFO. It just stays in its preset location at 8.6ms. If you want to change the “tuning,” adjust flange glide
(FDLY) in Effect Edit mode to another value.
P223 DM:*Dly Daze
EA:604*3VoiceDlys EB:603*PingoPongo
The Soft knob parameter affects the delay spacing in both Machine effect presets. Increasing the Soft knob parameter value
will make each delay effect longer and longer; decreasing it will make each delay effect shorter. The Soft knob value is set
to 12 when the setup is selected.
MchA EA:604 *3Voice Dlys Two taps (Delays 3 and 4 ) are set with delay ratios of 1:2, meaning that, when one is 200ms,
the other is 400ms, or when one is 359, the other is 718ms. This relationship is patched to the Soft knob parameter in Setup
Select mode.
MchB EB:603 *Pingo Pongo Ping - Pong delays bouncing back and forth. The Soft knob controls the timing of the bounce.