Lexicon 300, Owner'S Manual

Page: 106 / 155

Lexicon
300 V 3.0 Owner's Manual
5-14
P307 CC:Dly->Pch
EA:609 Chorus EB:801 Mono Shift
This preset combines a stereo chorus passing into a mono shift program. Go to Machine B Effect Edit and modify the Glide
Pitch (GLD) parameter. If you want to open the stereo chorus effect, reduce BMIX so that some of the Chorus program passes
by the Mono Shift program. The LFO is set moderatly fast, to 2.14Hz, with a Triangle shape.
MchA EA:609 Chorus This preset makes use of a small variation in the glide delay to modulate the sound. The glide
moves between 9.7ms and 11.8ms. Advancing the LFO to values near 1.50Hz to 2.0 Hz yields a nice chorusing effect. There
are no other delay lines, but the output lines are channel-swapped such that the left input passes to the right output, and vice-
versa. (In a Dual Mono Setup, of course, this is inaudible.)
MchB EB:801 Mono Shift Baseline mono shift program with no pitch shift. Go to the glide parameter (GLD) in Effect Edit
mode to select the amount of pitch shifting you want.
P308 CC:Pch->*Dly
EA:810 Vocal Shift EB:603 *PingoPongo
This is a very interesting detuned left/right delay effect. The Soft knob parameter controls the timing of the bouncing delays.
The stored value of the Soft knob parameter is 16.
MchA EA:810 Vocal Shift This preset combines a short delay line recirculating around a -7 cent pitch shifter.
MchB EB:603 *Pingo Pongo Ping Pong delays bouncing back and forth. The Soft knob controls the timing of the bounce.
P309 CC:*Dly->Comp
EA:604 *3Voice Dly EB:901 EZ Comp 2:1
The Soft knob controls the timing relationships of the delay settings in the Machine A effect. The Soft knob parameter is stored
with a value of 31.
MchA EA:604 *3Voice Dlys Two taps (Delays 3 and 4 ) are set with delay ratios of 1:2, meaning that, when one is 200ms,
the other is 400ms, or when one is 359, the other is 718ms. This relationship is patched to the Soft knob in Setup Select.
MchB EB:901 EZ Comp 2:1 A nice preset to add to an overall mix. You may need to adjust the Threshold parameter to
make it work for the particular signal you’re feeding it. Release is set to gently fall away after 363ms.
P310 CC:Comp->*Dly
EA:901 EZ Comp 2:1 EB:613*Wall Slaps
This effect places a soft compressor ahead of Machine B, which is running a delay program. The Soft knob value is set to
20 when the setup is selected.
MchA EA:901 EZ Comp 2:1 A “soft” preset to add to an overall mix. You may need to adjust the Threshold parameter
to make it work for the particular signal you’re feeding it. Release is set to gently fall away after 363ms.
MchB EB:613*Wall Slaps Walls tied to the Soft knob move outward. A small amount of diffusion to smear the attack.