Lexicon 300, Owner'S Manual

Page: 34 / 155

3-5
System Operation
NOTE: Most studio applications assume a100% Wet mix. Most SINGLE
Setups are set with OMIX at 100% Wet. However, it is possible that some pre-
fade sends to the 300 will require the mix to be set to another value.
Dual Mono Setups (Setup Presets 201-225) are “Split” configurations. Turn the
Soft knob to cue up different Dual Mono Setups. The top line of the display
indicates the Setup Preset number and the two types of effects loaded in the
Setup. The bottom display line shows which “Split” Effect is loaded into which
machine. In the Dual Mono”Split” configuration each DSP engine, Mach A and
Mach B, can run special Split Effect Algorithms and Presets .
Analog and/or Digital formats can be input into the 300. When only one input type
(analog
or digital) is specified, we refer to the format as "Fixed."
When Analog is selected as the main Input source, the Digital I/O port can be
placed in a pre or post effect patch point. Conversely, if the Digital input is
selected as the main input source, Analog I/O connections can be used as a
patch point.
Dual Mono Setups
L
R
A
Level
EFFECT
EDIT A
L
Out
R
Out
Analog or
Digital
B
Level
A
Balance
B
Balance
Dry
EFFECT
EDIT B
A
Mix
B
Mix
Dry
Patch Points
Patch Points
Fixed Format