Specifications
Leuze electronic
BCL 34
19
TNT
35/7-2
4
V
5.3
Device Construction and Components
A modular hood of type MS 34 103 or MS 34 105 with integrated connectors is part of
every BCL 34. The two hoods with integrated connectors are used to connect the BCL 34
to the PROFIBUS. For this, they feature one HOST/BUS IN and BUS OUT connection each,
as well as an internal switch for address setting.
If only the connection to the PROFIBUS is intended, type MS 34 103 is sufficient.
If, in addition, switching input and output or a modular service display are to be connected,
an MS 34 105 is required. Although switching inputs and outputs are available on the
voltage supply connector, the switching inputs of the MS 34 105 have the advantage that
a standard sensor connector can be used.
Figure 5.1:
BCL 34 with MS 34 105
5.3.1
Dimensioned and Connection Drawings
BCL 34
Figure 5.2:
Dimensioned drawing of the BCL 34
Plan view
(without heating)
Rear view
all dimensions in mm
Plan view
(with heating)
Summary of Contents for BCL34
Page 1: ...BCL34 Barcode reader GB 05 10 08 50038851 T E C H N I C A L D E S C R I P T I O N...
Page 98: ...Appendix 96 BCL 34 Leuze electronic 12 Appendix 12 1 EU Declaration of Conformity...
Page 102: ...Index 100 BCL 34 Leuze electronic V Vibration 18 W Warm up time 18 Warning notices 8 Weight 17...
