Mechanical installation
INTORQ | BA 14.0197 | 06/2014
28
4.4.6
Manual release assembly (optional)
Fig. 12
Assembly of the manual release
1. Insert four stud bolts (12.4) into the bore holes of the transport safety bolts which have been removed
and screw down tight using a screw driver.
2. Locate the levers (12.1) onto the brake (14).
3. Place four cup springs (12.6) in alternate directions in each of the four sleeves (12.7). Finally, insert the
sleeves into the holes in the lever (12.1).
NOTICE
The assembly of the manual release is done to the spring-applied brake which is already fitted
to the bearing shield
23. The air gap of the brake is set to the rated air gap,
15.
12.1 Lever
12.6 Cup springs
12.8 Nuts
12.4 Stud bolts
12.7 Sleeves
14 Brake
12.4
12.1
12.6
12.7
12.8
14
Summary of Contents for E27 Series
