Safety instructions
General safety and application notes for Lenze control systems
2
l
8
LDEDS−CCU210B EN 4.0
2
Safety instructions
2.1
General safety and application notes for Lenze control systems
(in accordance with Low−Voltage Directive 2006/95/EC)
General
Lenze
controls
can have live, even moving or rotating parts during operation − according
to their enclosure. Surfaces can be hot.
The unauthorised removal of the required cover, improper use, incorrect installation or
operation will risk serious personal injury and damage to property.
Additional information can be found in the documentation.
All work concerning transport, installation, commissioning and maintenance may only be
performed by qualified technical personnel (observe IEC 364 or CENELEC HD 384 or
DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and national regulations for the
prevention of accidents).
Qualified technical personnel within these basic safety instructions are persons who are
familar with installation, assembly, commissioning and operation of the product and who
have the respective qualifications for their work.
The Hardware Manual contains important safety instructions and notes with regard to the
connection and commissioning of the control system, which you have to observe.
Therefore always keep the Hardware Manual near the control system.
The Hardware Manual always has to be complete and in a perfectly readable state.
