Safety instructions
General safety and application notes for Lenze control systems
l
10
LDEDS−CCU210B EN 4.0
Electrical connection
When working on live control systems, observe the applicable national regulations for the
prevention of accidents (e.g. VBG 4 in Germany).
Perform the electrical installation in accordance with applicable regulations (e.g. cable
cross−sections, fusing, PE connections). The documentation contains additional notes.
The documentation contains notes for EMC−compliant installation (shielding, earthing,
arrangement of filters and routing of cables). Also observe these notes for direct control
systems bearing the CE mark. The manufacturer of the system or machine is responsible
for maintaining the limit values required by EMC regulations.
Operation
You may have to fit additional monitoring and protection devices to systems with built−in
Lenze control systems in accordance with relevant safety regulations (e.g. law on technical
equipment, regulations for the prevention of accidents). You may adjust the Lenze control
systems to your application. Observe the notes in the documentation for this purpose.
Keep all protective covers closed during operation.
Service and maintenance
The Lenze control system is maintenance−free, provided that the prescribed operating
conditions are complied with.
Disposal
Send metals and plastics for recycling. Dispose of assembled PCBs properly.
Observe the product−specific safety and application notes in these instructions!
