Lenovo TP00052A User Manual Download

Page: 156 / 184

Solution

: Turn off the computer by pressing and holding the power button for 4 seconds or more. If the

system is still not reset, remove the ac power adapter and the battery.

Boot problems

Print these instructions now and keep them with your computer for reference later.

If you receive an error message before the operating system loads, follow the appropriate corrective actions
for POST error messages.

If you receive an error message while the operating system is loading the desktop configuration after the
POST is completed, check the following items:

1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message.

2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for the

error message.

Sleep and hibernation problems

•

Problem

: The computer enters sleep mode unexpectedly.

Solution

: If the microprocessor overheats, the computer automatically enters sleep mode to allow the

computer to cool and to protect the microprocessor and other internal components. Check the settings
for sleep mode.

•

Problem

: The computer enters sleep mode (the sleep indicator turns on) immediately after the power-on

self-test.

Solution

: Make sure that:

– The battery is charged.

– The operating temperature is within the acceptable range. Refer to “Operating environment” on page

15.

If the battery is charged and the temperature is within range, have the computer serviced.

•

Problem

: A critical low-battery error occurs, and the computer immediately turns off.

Solution

: The battery power is getting low. Connect the ac power adapter to the computer and plug it

into an electrical outlet, or replace the battery with a charged one.

•

Problem

: The computer display remains blank after you press Fn to return from sleep mode.

Solution

: Check whether an external monitor was disconnected or turned off while the computer was

in sleep mode. If you disconnected or turned off the external monitor, connect it or turn it on before
resuming the computer from the sleep mode. When resuming the computer from the sleep mode
without attaching the external monitor or turning it on, and the computer display remains blank, press
F7 to bring up the computer display.

•

Problem

: The computer does not return from sleep mode, or the system status indicator (illuminated

ThinkPad logo) blinks slowly and the computer does not work.

Solution

: If the system does not return from sleep mode, it might have entered sleep or hibernation

mode automatically because the battery is depleted. Check the system status indicator (illuminated
ThinkPad logo).

– If the system status indicator (illuminated ThinkPad logo) blinks slowly, your computer is in sleep mode.

Connect the ac power adapter to the computer; then press Fn.

– If the system status indicator (illuminated ThinkPad logo) is off, your computer is in power-off state or

in hibernation mode. Connect the ac power adapter to the computer; then press the power button
to resume operation.

140