Lenovo TP00052A, User Manual

Page: 122 / 184

• UEFI Secure Boot
Config menu
If you need to change the configuration of your computer, select Config from the ThinkPad Setup program
main menu.
The following table shows the contents of the Config menu.
Notes:
• Some items are displayed on the menu only if the computer supports the corresponding features.
• Default values are in boldface .
Table 4. Config menu items
Menu item
Submenu item Selection Comments
Wake On LAN • Disabled
• AC Only
• AC and Battery
Enable the system to power
on when the Ethernet
controller receives a magic
packet.
If you select AC Only , the
Wake on LAN function is
enabled only when the ac
power adapter is attached.
If you select AC and
Battery , the Wake on LAN
function is enabled with any
power sources.
Note: The magic packet
type Wake on LAN requires
ac power.
Note: The Wake on LAN
function does not work
when a hard disk password
is set.
Ethernet LAN Option ROM
(for UEFI Only boot mode
or Both with UEFI first )
• Disabled
• Enabled
Loads the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
Wireless LAN Radio • On
• Off
If you select On , the internal
wireless radio is turned on.
If you select
Off , the internal
wireless radio is turned off.
UEFI IPv4 Network Stack
(for UEFI Only boot mode
or Both with UEFI first )
• Disabled
• Enabled
Enable or disable Internet
Protocol Version 4 (IPv4)
network stack for the UEFI
environment.
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI first )
• Disabled
• Enabled
Enable or disable IPv6
(Internet Protocol Version
6) network stack for UEFI
environment.
Network
106
User Guide