Lenovo TP00052A, User Manual

Page: 125 / 184

Table 4. Config menu items (continued)
Menu item Submenu item Selection Comments
Password Beep • Disabled
• Enabled
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password. Beep and Alarm
Keyboard Beep • Disabled
• Enabled
Enable this option to
have a beep sound
when unmanageable key
combination are pressed.
Serial ATA (SATA) SATA Controller Mode
Option • Compatibility
• AHCI
Selects SATA controller
operation mode. If you
select
Compatibility mode,
SATA controller operates in
compatibility mode.
Core Multi-Processing • Disabled
• Enabled
Enable or disable additional
execution core units within
a CPU.
Note: If you are using a
computer with a single-core
processor, this item is not
available.
CPU
Intel Hyper-Threading
Technology • Disabled
• Enabled
Enable or disable additional
logical processors within a
processor core.
Note: This sub-menu is not
supported in models with
an AMD CPU.
Date/Time menu
If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup
program main menu. The following submenu is displayed:
• System Date
• System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change the date or time.
2. Press Tab, Shift+Tab, or Enter to select a field.
3. Type the date or time.
Notes: Another way to adjust the date and time is pressing the following keys:
• Fn+F5 or –: Change to a lower value.
• Fn+F6 or the combination of Shift and +: Change to a higher value.
4. Press Fn+F10 to save the changes and restart the system.
Chapter 7
.
Advanced configuration
109