manualshive.com logo in svg

Lenovo ThinkServer TS430 0387, User Manual

The Lenovo ThinkServer TS430 0387 is an advanced server designed for efficient and reliable performance. Enhance your experience by accessing the comprehensive User Manual, available for free download on our website. Get all the information you need to maximize the potential of this remarkable product at manualshive.com.

Share
Download
background image

•

Onboard SATA software RAID configuration using the LSI Software RAID Configuration Utility
program; and RAID management using the MegaRAID Storage Manager program

The onboard SATA software RAID controller is integrated on the Intel C202 chip on the system board.
If your server has SATA hard disk drives that are connected to the system board, you can use the LSI
Software RAID Configuration Utility program to configure RAID. By default, your server supports onboard
SATA software RAID levels 0, 1, and 10. You also can activate RAID level 5 by installing a ThinkServer
SATA Software RAID 5 activation key. See “Installing or removing the ThinkServer RAID 100 upgrade
key for Advanced RAID” on page 111.

You can install and use the MegaRAID Storage Manager program to manage the RAID array and RAID
controller in an operating system environment.

For detailed information, see “Configuring the onboard SATA software RAID” on page 76.

•

Advanced SATA/SAS hardware RAID configuration using the WebBIOS Configuration Utility
program; and RAID management using the MegaRAID Storage Manager program and the MegaCLI
Configuration Utility program (requires a RAID card)

Some server models come with a required RAID card to provide advanced SATA/SAS hardware RAID
functions to the server. You also can purchase the RAID card from Lenovo and install it into server models
that support the RAID card to get advanced SATA/SAS hardware RAID functions. See “RAID card” on
page 33 and “Installing or removing the RAID card” on page 103 for more information.

Note:

For server models with more than four hard disk drives or models that use SAS hard disk drives, a

RAID card must be installed.

The RAID card provides the WebBIOS Configuration Utility program to help you configure RAID
independently of the operating system. You also can install the MegaRAID Storage Manager program and
the MegaCLI Configuration Utility program to help you manage the RAID array and RAID controller in
an operating system environment. The supported RAID levels are RAID 0, 1, and 10 by default. For the
ThinkServer RAID 500 Adapter, to activate RAID 5 and RAID 50 levels, you need to install a RAID 5 key on
the RAID card. See “For the ThinkServer RAID 500 Adapter: Installing or removing the ThinkServer RAID
500 Upgrade Key for Advanced RAID” on page 105.

For detailed information, see “Configuring the advanced SATA or SAS hardware RAID” on page 81.

Note:

The ThinkServer EasyStartup program simplifies the process of configuring supported RAID and

installing supported operating systems and device drivers.

Before configuring RAID for your server, observe the following precautions:

1. Use hard disk drives that have the same capacity within a single RAID array.

2. Use hard disk drives that are of the same type (SATA or SAS) within a single RAID array.

3. Depending on the operating system, the primary RAID might be limited to 2 TB total drive capacity.

Configuring RAID using the ThinkServer EasyStartup program

The ThinkServer EasyStartup program simplifies the process of configuring supported RAID and installing
supported Windows and Linux operating systems and device drivers on your server. The user guide for the
program can be accessed directly from the program interface.

The ThinkServer EasyStartup program has the following features for RAID configuration:

• For use with all supported RAID controllers

• Automatically detects hardware and lists all supported RAID configurations

• Configures one or more disk arrays per controller depending on the number of drives attached to the

controller and the RAID level selected

• Supports hot-spare drives

Chapter 5

.

Configuring the server

75

Summary of Contents for ThinkServer TS430 0387





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TS430 0387

Datacom DM-SV01 Product Manual preview
DM-SV01
Brand: Datacom Pages: 89
H3C UniServer R6900 G5 Installation, Quick Start preview
UniServer R6900 G5
Brand: H3C Pages: 17
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
Quatech WLNG-AN-DP500 Series Reference Manual preview
WLNG-AN-DP500 Series
Brand: Quatech Pages: 120
EXAGATE SYSGuard 3001 Quick Installation Manual preview
SYSGuard 3001
Brand: EXAGATE Pages: 8
D-Link 301P - DP Print Server Manual preview
301P - DP Print Server
Brand: D-Link Pages: 150
Lantronix Device Installer User Manual preview
Device Installer
Brand: Lantronix Pages: 21
Lantronix Device Server MSS 485 Installation Manual preview
Device Server MSS 485
Brand: Lantronix Pages: 69
Lanner ISD-V330 User Manual preview
ISD-V330
Brand: Lanner Pages: 72
MAXDATA PLATINUM 500 I Quick Start Manual preview
PLATINUM 500 I
Brand: MAXDATA Pages: 2
MAXDATA SR 1202 Quick Manual preview
SR 1202
Brand: MAXDATA Pages: 6
Panduit NET-SERV Series Instructions Manual preview
NET-SERV Series
Brand: Panduit Pages: 24
ICP DAS USA M-4132 Faq preview
M-4132
Brand: ICP DAS USA Pages: 26
TRENDnet TEW-P11G Datasheet preview
TEW-P11G
Brand: TRENDnet Pages: 3
Polycom KIRK 300 Installation And Configuration Manual preview
KIRK 300
Brand: Polycom Pages: 60
Meinberg LANTIME IMS-M500 Manual preview
LANTIME IMS-M500
Brand: Meinberg Pages: 63
Supermicro SuperServer 520P-WTR User Manual preview
SuperServer 520P-WTR
Brand: Supermicro Pages: 114
Supermicro SuperStorageSystem SSG-5019D8-TR12P User Manual preview
SuperStorageSystem SSG-5019D8-TR12P
Brand: Supermicro Pages: 131

Brands by name

Popular brands

Load more brands