Lenovo ThinkServer TS430 0387, User Manual

Page: 57 / 220

For connector location information about the RAID card, hot-swap hard-disk-drive backplane, and the
system board, refer to the related topics in “Locations” on page 13.
For information about connecting the appropriate power connector of the power supply to the backplane,
see “Hot-swap hard-disk-drive backplane” on page 35.
System board components
Your server system board is a six-layer micro-ATX board based on the Intel Bromolow platform. The
following illustration shows the component locations on the system board.
Figure 29. System board components
1
Power Management Bus (PMBus) connector
20
Internal USB 2.0 Type A connector
2
TPM connector
21
Internal dual-port USB 2.0 connector 2
3
Memory slot 4 (DIMMB2)
22
Internal dual-port USB 2.0 connector 1
4
Memory slot 3 (DIMMB1)
23
System board battery
5
Memory slot 2 (DIMMA2)
24
Front panel connector
6
Memory slot 1 (DIMMA1)
25
System board jumper blocks
7
iButton socket
26
SATA SGPIO connector
8
Main power connector
27
Hard-disk-drive LED connector
9
5-pin system fan 2 connector
28
Intelligent Diagnostics Module connector
10
Microprocessor
29
Internal serial connector
11
Intel C202 chip
30
PCI card slot (PCI slot 1)
Chapter 3
.
Product overview
45