manualshive.com logo in svg

Lenovo ThinkServer TS430 0387, User Manual

The Lenovo ThinkServer TS430 0387 is an advanced server designed for efficient and reliable performance. Enhance your experience by accessing the comprehensive User Manual, available for free download on our website. Get all the information you need to maximize the potential of this remarkable product at manualshive.com.

Share
Download
background image

Installing and using the MegaRAID Storage Manager program

You can install and use the MegaRAID Storage Manager program to manage the RAID array and RAID
controller in an operating system environment after configuring RAID.

The installation package for the MegaRAID Storage Manager program is on the

ThinkServer EasyStartup

DVD. After you enter the operating system, insert the

ThinkServer EasyStartup

DVD into the optical drive.

The installation package for the MegaRAID Storage Manager program is located in the Utilities and Others
folder in the root directory of the DVD.

To install and use the MegaRAID Storage Manager program, refer to the following chapters in the

MegaRAID

SAS Software User Guide

on the documentation DVD that comes with your server:

Note:

Some information in these chapters might be intended for the advanced SATA/SAS hardware RAID

configurations and might not apply to the onboard SATA software configurations.

• “MegaRAID Storage Manager Overview and Installation”

• “MegaRAID Storage Manager Window and Menus”

• “Monitoring System Events and Storage Devices”

• “Maintaining and Managing Storage Configurations”

The

MegaRAID SAS Software User Guide

also is available on the Lenovo Web site at:

http://www.lenovo.com/UserManuals

Configuring the advanced SATA or SAS hardware RAID

Some server models come with a required RAID card to provide advanced SATA/SAS hardware RAID
functions to the server. You also can purchase the RAID card from Lenovo and install it into server models
that support the RAID card to get advanced SATA/SAS hardware RAID functions. See “RAID card” on page
33 and “Installing or removing the RAID card” on page 103 for more information.

Note:

For server models with more than four hard disk drives or models that use SAS hard disk drives, a

RAID card must be installed.

The RAID card provides the WebBIOS Configuration Utility program to help you configure RAID
independently of the operating system. You also can install the MegaRAID Storage Manager program
and the MegaCLI Configuration Utility program to help you manage the RAID array and RAID controller in
an operating system environment. The supported RAID levels are RAID 0, 1, and 10 by default. For the
ThinkServer RAID 500 Adapter, to activate RAID 5 and 50 levels, you need to install a RAID 5 key on the
RAID card. See “For the ThinkServer RAID 500 Adapter: Installing or removing the ThinkServer RAID 500
Upgrade Key for Advanced RAID” on page 105.

The installation packages for the MegaRAID Storage Manager program and the MegaCLI Configuration
Utility program are on the

ThinkServer EasyStartup

DVD. After you enter the operating system, insert the

ThinkServer EasyStartup

DVD into the optical drive. The installation packages for the programs are located in

the Utilities and Others folder in the root directory of the DVD.

Note:

The

ThinkServer EasyStartup

DVD is designed for different types of servers and the Utilities and Others

folder might contain additional installation packages that are not required to be installed into your server.

For instructions on how to configure and manage the advanced SATA or SAS hardware RAID, refer to
the

MegaRAID SAS Software User Guide

on the documentation DVD that comes with your server. This

document is also available on the Lenovo Web site at:
http://www.lenovo.com/UserManuals

Chapter 5

.

Configuring the server

81

Summary of Contents for ThinkServer TS430 0387





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TS430 0387

IBM H Series Installation And Service Manual preview
H Series
Brand: IBM Pages: 438
IBM xSeries 235 Maintenance & Troubleshooting preview
xSeries 235
Brand: IBM Pages: 214
IBM Eserver xSeries 360 Type 8686 Installation Manual preview
Eserver xSeries 360 Type 8686
Brand: IBM Pages: 74
Supero SUPERSERVER 5017C-MF User Manual preview
SUPERSERVER 5017C-MF
Brand: Supero Pages: 96
t.a.c. TAC Xenta 511 Handbook preview
TAC Xenta 511
Brand: t.a.c. Pages: 36
Supermicro SuperServer E301-9D-8CN8TP User Manual preview
SuperServer E301-9D-8CN8TP
Brand: Supermicro Pages: 117
Dell EMC PowerEdge R6415 Installation And Service Manual preview
PowerEdge R6415
Brand: Dell EMC Pages: 139
Planet FPS-3121G User Manual preview
FPS-3121G
Brand: Planet Pages: 74
Black Box ME0008A-MCAMP User Manual preview
ME0008A-MCAMP
Brand: Black Box Pages: 48
OSD Audio BLACK SRT4 User Manual preview
BLACK SRT4
Brand: OSD Audio Pages: 4
Supero 1027R-72BRFTP User Manual preview
1027R-72BRFTP
Brand: Supero Pages: 130
Intel S1200RP Getting Started preview
S1200RP
Brand: Intel Pages: 17
Intel SE7520AF2 Operating Manual preview
SE7520AF2
Brand: Intel Pages: 34
Intel S875WP1-E Specification preview
S875WP1-E
Brand: Intel Pages: 117
Sphere3D MOBOTIX Installation & Setup Manual preview
MOBOTIX
Brand: Sphere3D Pages: 9
Plustek MULTI-FUNCTIONAL SERVER User Manual preview
MULTI-FUNCTIONAL SERVER
Brand: Plustek Pages: 146
Inspur NF5488A5 User Manual preview
NF5488A5
Brand: Inspur Pages: 51
Dell EMC PowerEdge R440 Installation And Service Manual preview
PowerEdge R440
Brand: Dell EMC Pages: 154

Brands by name

Popular brands

Load more brands