manualshive.com logo in svg

Lenovo ThinkServer TS430 0387, User Manual

The Lenovo ThinkServer TS430 0387 is an advanced server designed for efficient and reliable performance. Enhance your experience by accessing the comprehensive User Manual, available for free download on our website. Get all the information you need to maximize the potential of this remarkable product at manualshive.com.

Share
Download
background image

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• If you remove the TR 700 Battery, you will lose the backup power for the ThinkServer RAID 700 Adapter.

• Use any documentation that comes with the TR 700 Battery and follow those instructions in addition to

the instructions in this topic.

To remove the TR 700 Battery, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. Remove the server cover. See “Removing the server cover” on page 87.

3. Lay the server on its side for easier operation.

4. If a PCI card bracket assembly is installed in your server, remove the PCI card bracket assembly. See

“Removing and reinstalling the PCI card bracket assembly” on page 91.

5. Locate the ThinkServer RAID 700 Adapter, which is located in the PCI-E slot 3 on the system board.

6. Remove the ThinkServer RAID 700 Adapter, which is a kind of RAID card. See “Installing or removing

the RAID card” on page 103.

7. Carefully remove the three screws that secure the TR 700 Battery and then remove the TR 700 Battery

from the ThinkServer RAID 700 Adapter.

Note:

Center the screwdriver when you remove the screws to avoid possible damage to any parts.

Figure 52. Removing the TR 700 Battery from the ThinkServer RAID 700 Adapter

8. If you want to install a new TR 700 Battery, see “Installing the TR 700 Battery” on page 108.

9. Reinstall the ThinkServer RAID 700 Adapter with a new TR 700 Battery or without a TR 700 Battery. See

“Installing or removing the RAID card” on page 103.

10. Reinstall the PCI card bracket assembly. See “Removing and reinstalling the PCI card bracket

assembly” on page 91.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the removal procedure, go to “Completing the parts replacement” on page 170.

110

ThinkServer TS430 User Guide

Summary of Contents for ThinkServer TS430 0387





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TS430 0387

Aastra 400 Series System Manual preview
400 Series
Brand: Aastra Pages: 592
Patton electronics 3120 Administrator'S Reference Manual preview
3120
Brand: Patton electronics Pages: 331
Qlogic iSR6200 Quick Start Manual preview
iSR6200
Brand: Qlogic Pages: 20
IBM System x3100 M4 Problem Determination And Service Manual preview
System x3100 M4
Brand: IBM Pages: 332
Omega DPi8 User Manual preview
DPi8
Brand: Omega Pages: 49
Iwatsu ENTERPRISE 5.0 Owner'S Manual preview
ENTERPRISE 5.0
Brand: Iwatsu Pages: 338
NEC Express5800/R120h-1E Manual preview
Express5800/R120h-1E
Brand: NEC Pages: 52
IBM 9123710 - eServer OpenPower 710 Introduction Manual preview
9123710 - eServer OpenPower 710
Brand: IBM Pages: 70
IntesisBox Modbus Server-Cerberus ISO1745 Installation Manual preview
Modbus Server-Cerberus ISO1745
Brand: IntesisBox Pages: 5
TYAN Transport TN27 B4987 Service Manual preview
Transport TN27 B4987
Brand: TYAN Pages: 135
xFusion Digital Technologies FusionServer XH321 V5 Manual preview
FusionServer XH321 V5
Brand: xFusion Digital Technologies Pages: 76
Fujitsu Siemens Computers PRIMERGY econel 20 Operating Manual preview
PRIMERGY econel 20
Brand: Fujitsu Siemens Computers Pages: 62
Fujitsu Siemens Computers SPARC Enterprise M4000 User Manual preview
SPARC Enterprise M4000
Brand: Fujitsu Siemens Computers Pages: 162
Teledyne Dock Server User Manual preview
Dock Server
Brand: Teledyne Pages: 228
GIGA-BYTE TECHNOLOGY E252-P31 User Manual preview
E252-P31
Brand: GIGA-BYTE TECHNOLOGY Pages: 84
Square One SQ201-N User Manual preview
SQ201-N
Brand: Square One Pages: 63
Sphere3D GW2000 Quick Start Manual preview
GW2000
Brand: Sphere3D Pages: 2
TROY Group PocketPro USB Installation And User Manual preview
PocketPro USB
Brand: TROY Group Pages: 40

Brands by name

Popular brands

Load more brands