manualshive.com logo in svg

Lenovo ThinkServer TS430 0387, User Manual

The Lenovo ThinkServer TS430 0387 is an advanced server designed for efficient and reliable performance. Enhance your experience by accessing the comprehensive User Manual, available for free download on our website. Get all the information you need to maximize the potential of this remarkable product at manualshive.com.

Share
Download
background image

To update (flash) the BIOS, do the following:

1. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to locate the BIOS

update package.

2. Download the BIOS update package and the installation instructions in a TXT file. Then, print the

installation instructions.

3. Turn on the server and press the F1 key as soon as you see the logo screen to start the Setup Utility

program. See “Starting the Setup Utility program” on page 57.

4. On the

Security

menu, check the

BIOS Write Protect

setting. To update (flash) the BIOS, the

BIOS

Write Protect

item must be set to

Disabled

.

5. Press F10 to save settings and exit the Setup Utility program. Then, follow the installation instructions

to update (flash) the BIOS.

6. Check and reconfigure the BIOS settings for your specific needs based on your note or refer to “Using

the Setup Utility program” on page 57 after the BIOS update process is completed.

Recovering from a BIOS update failure

If the power to your server is interrupted while the BIOS is being updated, your server might not restart
correctly. If this happens, perform the following procedure to recover from the BIOS update failure.

To recover from a BIOS update failure, do the following:

1. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to download a

BIOS update package. Then, make a bootable disc or a bootable USB key and print the TXT file that
contains the installation instructions.

2. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

3. Remove the server cover. See “Removing the server cover” on page 87.

4. Locate the BIOS recovery jumper on the system board. See “System board jumpers” on page 48.

5. Remove any parts or disconnect any cables that might impede your access to the BIOS recovery jumper.

6. Move the BIOS recovery jumper from the normal position (pin 1 and pin 2) to the recovery position

(pin 2 and pin 3).

7. Reinstall any parts or reconnect any cables and reinstall the server cover. See “Completing the parts

replacement” on page 170.

8. Connect the server to an ac power source and then follow the installation instructions for the BIOS

update utility program to start the server from the recovery image. The recovery window opens.

9. Press Enter to start the recovery process. After the recovery process is completed, your server will

automatically turn off.

10. Repeat step 2 through step 5.

11. Move the BIOS recovery jumper back to the normal position (pin 1 and pin 2).

12. Reinstall any parts or reconnect any cables and reinstall the server cover. See “Completing the parts

replacement” on page 170.

13. Connect the server to an ac power source and turn on the server. The BIOS settings become the default

settings of the updated BIOS version. You need to check and configure the BIOS settings for your
specific needs. See “Using the Setup Utility program” on page 57.

Using the ThinkServer EasyStartup program

This topic guides you to use the ThinkServer EasyStartup program to set up and configure your server.

70

ThinkServer TS430 User Guide

Summary of Contents for ThinkServer TS430 0387





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TS430 0387

YOKOGAWA SMARTDAG+ GM10 User Manual preview
SMARTDAG+ GM10
Brand: YOKOGAWA Pages: 22
Hi-flying HF2221 User Manual preview
HF2221
Brand: Hi-flying Pages: 29
d3 Technologies d3 4x4pro Quick Start Manual preview
d3 4x4pro
Brand: d3 Technologies Pages: 10
CNET CNP-101UW Specifications preview
CNP-101UW
Brand: CNET Pages: 2
Speco ONSIP OS101 User Manual preview
ONSIP OS101
Brand: Speco Pages: 28
RIOT CloudLink Installation Manual preview
CloudLink
Brand: RIOT Pages: 18
NEC SX-Aurora TSUBASA A300-2 User Manual preview
SX-Aurora TSUBASA A300-2
Brand: NEC Pages: 30
NEC SX-Aurora TSUBASA A300-4 User Manual preview
SX-Aurora TSUBASA A300-4
Brand: NEC Pages: 31
NEC TM1200 User Manual preview
TM1200
Brand: NEC Pages: 134
IBM @server x Series Quick Setup Manual preview
@server x Series
Brand: IBM Pages: 8
Toshiba Strata Installation Manual preview
Strata
Brand: Toshiba Pages: 28
Toshiba RS-TX60 Viewer'S Manual preview
RS-TX60
Brand: Toshiba Pages: 204
Toshiba SD-H400 - Combination Progressive-Scan DVD Player Installation Manual preview
SD-H400 - Combination Progressive-Scan DVD Player
Brand: Toshiba Pages: 291
Siemens APOGEE Ethernet Microserver 2100 Installation Instructions preview
APOGEE Ethernet Microserver 2100
Brand: Siemens Pages: 2
Siemens OCI670 Series Installation Instructions Manual preview
OCI670 Series
Brand: Siemens Pages: 38
Siemens 3964R User Manual preview
3964R
Brand: Siemens Pages: 40
Siemens RUGGEDCOM RS401 Installation Manual preview
RUGGEDCOM RS401
Brand: Siemens Pages: 50
Siemens PRIMERGY 560 Operating Manual preview
PRIMERGY 560
Brand: Siemens Pages: 101

Brands by name

Popular brands

Load more brands