Lenovo ThinkServer TS430 0387 User Manual Download | Manualshive

Page: 115 / 220

background image

7. Make a selection depending on your needs and click

Next

.

8. Insert the

ThinkServer EasyStartup

DVD that comes with your server into the optical drive.

Note:

You do not need to use the driver disc that comes with the Ethernet card.

9. Select

Install the software automatically (Recommended)

and click

Next

to continue.

10. Follow the instructions on the screen to complete the installation.

Removing the Ethernet card

Attention:

Do not open your server or attempt any repair before reading and understanding the “Safety information”

on page iii and “Guidelines” on page 85.

This topic provides instructions on how to remove the Ethernet card.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Note:

Use any documentation that comes with the Ethernet card and follow those instructions in addition to

the instructions in this topic.

To remove the Ethernet card, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. Remove the server cover. See “Removing the server cover” on page 87.

3. Lay the server on its side for easier operation.

4. If a PCI card bracket assembly is installed in your server, remove the PCI card bracket assembly. See

“Removing and reinstalling the PCI card bracket assembly” on page 91.

5. Locate the Ethernet card. The Ethernet card can be in the PCI-E slot 2 or the PCI-E slot 3 that supports

a card with 167 mm (6.57 inches) in length. See “System board components” on page 45.

6. The Ethernet card is a kind of PCI card. See “Removing a PCI card” on page 100 and follow those

instructions to remove the Ethernet card.

7. Install the PCI card bracket assembly if a RAID card is installed in your server. See “Removing and

reinstalling the PCI card bracket assembly” on page 91.

8. If you are instructed to return the old Ethernet card, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the removal procedure, go to “Completing the parts replacement” on page 170.

Installing or removing the RAID card

This topic provides instructions on how to install or remove the RAID card.

A specific RAID card is required for server models with more than four hard disk drives or models that use
SAS hard disk drives. You also can install the RAID card for advanced SATA/SAS hardware RAID functions.
For more information, see “RAID card” on page 33 and “Configuring RAID” on page 73.

Note:

This topic applies only to models that support the RAID card.

Installing, removing, or replacing hardware

103

«
...
113
114
115
116
117
...
»

Summary of Contents for ThinkServer TS430 0387





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TS430 0387

Brand: Acano Pages: 17

Brand: Xblue Networks Pages: 148

Brand: SafeNet Pages: 109

totalstorage 200

Brand: IBM Pages: 180

NOP1840 PEP-Box

Brand: Newtec Pages: 96

Brand: Integra Pages: 40

SUPERSERVER 5014C-MT

Brand: Supero Pages: 112

Brand: Icy Box Pages: 17

Brand: EDSLab Pages: 24

@server iSeries

Brand: IBM Pages: 294

ProxyServer MTPSR1-202ST

Brand: Multitech Pages: 142

Brand: TAG Pages: 84

Brand: TAG Pages: 80

Brand: VC Pages: 100

Brand: 10ZiG Technology Limited Pages: 2

Brand: Supero Pages: 104

Brand: Intel Pages: 120

Brand: Intel Pages: 233

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands