manualshive.com logo in svg

Lenovo ThinkServer TS430 0387, User Manual

The Lenovo ThinkServer TS430 0387 is an advanced server designed for efficient and reliable performance. Enhance your experience by accessing the comprehensive User Manual, available for free download on our website. Get all the information you need to maximize the potential of this remarkable product at manualshive.com.

Share
Download
background image

• On the

Server Management

menu, select

System Information

to view the information about your

system, including the TMM information.

Setup Utility program interface

This topic provides information about the menus and items in the Setup Utility program.

Depending on the version of your system BIOS, some menu or item information might differ slightly from the
information in this topic. The information in this topic is based on the 0.9b version of the BIOS.

Notes:

1. The default settings are already optimized for you. Use the default value for any item you are not familiar

with. Do not change the value of unfamiliar items or items that are not mentioned in this topic to avoid
unexpected problems. If you consider changing the server configuration, proceed with extreme caution.
Setting the configuration incorrectly might cause unexpected results. If you cannot turn on the server
because of incorrect BIOS settings, use the Clear CMOS /Recovery jumper to recover the BIOS to the
factory default settings or use the BIOS recovery jumper to boot the server from a BIOS recovery image
and recover the BIOS to the version in the image. See “System board jumpers” on page 48.

2. Lenovo provides the BIOS update utility on the Lenovo Support Web site. You can download the BIOS

image and follow the instructions on the Web site to update the BIOS. See “Updating or recovering the
BIOS” on page 69. After updating the BIOS, all the BIOS settings become the default settings of the
updated BIOS version. You need to check and reconfigure the BIOS settings for your specific needs.

3. If you have changed any hardware in the server, you might need to reflash the BIOS, the TMM firmware,

and the FRU/SDR.

The following menus are listed on the

BIOS Setup Utility

screen:

•

Main

: See “Main menu” on page 58.

•

Advanced

: See “Advanced menu” on page 59.

•

Security

: See “Security menu” on page 62.

•

Server Management

: See “Server Management menu” on page 63.

•

Boot Options

: See “Boot Options menu” on page 64.

•

Boot Manager

: See “Boot Manager menu” on page 66.

•

Exit

: “Exit menu” on page 66.

Main menu

After entering the Setup Utility program, you can see the

Main

menu, which lists some basic information

about the system BIOS version and build date, the microprocessor, memory, and the system date and time.

58

ThinkServer TS430 User Guide

Summary of Contents for ThinkServer TS430 0387





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TS430 0387

NEC Univerge SV9100 System Maintenance Manual preview
Univerge SV9100
Brand: NEC Pages: 78
NEC UNIVERGE SL2100 Manual preview
UNIVERGE SL2100
Brand: NEC Pages: 34
NEC SV8500 Overview preview
SV8500
Brand: NEC Pages: 2
NEC SV8500 Operation And Maintenance Manual preview
SV8500
Brand: NEC Pages: 975
NEC Express5800/320Ma Software Installation And Configuration Manual preview
Express5800/320Ma
Brand: NEC Pages: 86
Zenith z-server lt User Manual preview
z-server lt
Brand: Zenith Pages: 218
Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual preview
N2400 - TaskSmart - 1 GB RAM
Brand: Compaq Pages: 372
IBM 7944E2U User Manual preview
7944E2U
Brand: IBM Pages: 21
Infortrend EonStor GS 3000 Series Hardware Manual preview
EonStor GS 3000 Series
Brand: Infortrend Pages: 134
EXAGATE SYSGuard 3001 Quick Installation Manual preview
SYSGuard 3001
Brand: EXAGATE Pages: 8
Asus AAEON ARES-WHI0 User Manual preview
AAEON ARES-WHI0
Brand: Asus Pages: 76
Asus TS100-E5/PI4 Configuration Manual preview
TS100-E5/PI4
Brand: Asus Pages: 16
Asus VivoPC User Manual preview
VivoPC
Brand: Asus Pages: 42
Asus RS720A-E9-RS24-E User Manual preview
RS720A-E9-RS24-E
Brand: Asus Pages: 162
Asus RS700D-E6 RS8 User Manual preview
RS700D-E6 RS8
Brand: Asus Pages: 164
Asus TS700-E9 Series User Manual preview
TS700-E9 Series
Brand: Asus Pages: 178
Asus TS300-E4 User Manual preview
TS300-E4
Brand: Asus Pages: 224
Asus RS920A-E6/RS8 User Manual preview
RS920A-E6/RS8
Brand: Asus Pages: 162

Brands by name

Popular brands

Load more brands