manualshive.com logo in svg

Lenovo ThinkServer TS430 0387, User Manual

The Lenovo ThinkServer TS430 0387 is an advanced server designed for efficient and reliable performance. Enhance your experience by accessing the comprehensive User Manual, available for free download on our website. Get all the information you need to maximize the potential of this remarkable product at manualshive.com.

Share
Download
background image

• Creates a RAID response file that can be used to configure RAID controllers on similarly configured

Lenovo servers

See “Using the ThinkServer EasyStartup program” on page 70 and view the user guide from the main
interface of the program.

Some RAID management software also is provided on the

ThinkServer EasyStartup

DVD to help you manage

RAID arrays and RAID controllers in an operating system environment. After you enter the operating system,
insert the

ThinkServer EasyStartup

DVD into the optical drive. The installation packages for the programs are

located in the Utilities and Others folder in the root directory of the DVD. The

ThinkServer EasyStartup

DVD is

designed for different types of servers and the Utilities and Others folder might contain additional installation
packages that are not required to be installed into your server. For more information, see “Installing and
using the MegaRAID Storage Manager program” on page 81 and “Configuring the advanced SATA or SAS
hardware RAID” on page 81.

Configuring the onboard SATA software RAID

The onboard SATA software RAID controller is integrated in the Intel C202 chip on the system board. If your
server has SATA hard disk drives that are connected to the system board, you can use the LSI Software
RAID Configuration Utility program to configure RAID independently of the operating system. By default,
your server supports onboard SATA software RAID levels 0, 1, and 10. You also can activate RAID 5 by
installing a ThinkServer SATA Software RAID 5 activation key. See “Installing or removing the ThinkServer
RAID 100 upgrade key for Advanced RAID” on page 111.

You can install and use the MegaRAID Storage Manager program to manage the RAID array and RAID
controller in an operating system environment.

Starting the LSI Software RAID Configuration Utility program

This topic provides instructions on how to start the LSI Software RAID Configuration Utility program.

To start the LSI Software RAID Configuration Utility program, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 57.

2. On the

Advanced

menu, select

SATA Configuration

➙

SATA Mode

.

3. Select

RAID Mode

. Then, press F10 to save settings and exit the Setup Utility program.

4. When you see the message “Press Ctrl-M or Enter to run LSI Software RAID Setup Utility,” immediately

press Ctrl+M or Enter to start the LSI Software RAID Configuration Utility program.

LSI Software RAID Configuration Utility program interface

This topic provides information about the menus and items in the LSI Software RAID Configuration Utility
program. Depending on the version of the program, some menu or item information might differ slightly from
the information in this topic.

When working with the LSI Software RAID Configuration Utility program, you must use the keyboard.
The keys used to perform various tasks are displayed on the bottom of each screen. Use up and down
arrow keys to navigate between items. For most items, the corresponding help message is displayed
on the bottom of the screen when the item is selected. If the item has submenus, you can display the
submenus by pressing Enter.

76

ThinkServer TS430 User Guide

Summary of Contents for ThinkServer TS430 0387





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TS430 0387

NEC Express5800/320Ma Software Installation And Configuration Manual preview
Express5800/320Ma
Brand: NEC Pages: 86
American Megatrends StorTrends 1312-P Specifications preview
StorTrends 1312-P
Brand: American Megatrends Pages: 2
TYAN Transport GT26-B4987 Service Manual preview
Transport GT26-B4987
Brand: TYAN Pages: 125
Western Digital Ultrastar Serv60+8 User Manual preview
Ultrastar Serv60+8
Brand: Western Digital Pages: 406
MAXDATA PLATINIUM 9000-4R User Manual preview
PLATINIUM 9000-4R
Brand: MAXDATA Pages: 18
HP AlphaServer ES47 Installation Manual preview
AlphaServer ES47
Brand: HP Pages: 76
HP AlphaServer GS80 Upgrade Manual preview
AlphaServer GS80
Brand: HP Pages: 88
HP 16-way Specification preview
16-way
Brand: HP Pages: 39
HP 16/18-Port Cable Management Kit Installation Manual preview
16/18-Port Cable Management Kit
Brand: HP Pages: 14
HP 11Q98EA#ABU User Manual preview
11Q98EA#ABU
Brand: HP Pages: 49
HP AlphaServer ES47 Cli Reference Manual preview
AlphaServer ES47
Brand: HP Pages: 152
HP AlphaStation DS20 Specifications preview
AlphaStation DS20
Brand: HP Pages: 15
HP AlphaServer ES45 Overview preview
AlphaServer ES45
Brand: HP Pages: 38
HP AB500A - Integrated Lights-Out Advanced Technology Brief preview
AB500A - Integrated Lights-Out Advanced
Brand: HP Pages: 43
HP AlphaServer GS1280 Systems Specification preview
AlphaServer GS1280 Systems
Brand: HP Pages: 59
HP 2533t - Compaq Mobile Thin Client Maintenance And Service Manual preview
2533t - Compaq Mobile Thin Client
Brand: HP Pages: 116
HP 9000 V2500 SCA Operator'S Manual preview
9000 V2500 SCA
Brand: HP Pages: 206
HP 127695-B21 - Smart Array 431 RAID Controller Technology Brief preview
127695-B21 - Smart Array 431 RAID Controller
Brand: HP Pages: 9

Brands by name

Popular brands

Load more brands