manualshive.com logo in svg

Lenovo ThinkServer TD340, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer TD340 is a robust and reliable server designed to meet the needs of small to medium-sized businesses. To aid in seamless operation and maintenance, we offer the User Manual and Hardware Maintenance Manual, available for free download from our website, ensuring hassle-free setup and optimal performance.

Share
Download
background image

Table 4. LSI Software RAID Configuration Utility program menu items (continued)

Menu item

Submenu item

Comments

Adapter

Set adapter-related parameters, such
as rebuild rate, consistency check rate,
and so on.

Virtual Drive

Set virtual drive parameters.

Objects

Physical Drive

Set physical drive parameters, such as
creating a hot-spare drive for the virtual
drive, making a failing drive as online,
changing a drive state, and viewing the
specifications of a physical drive.

Rebuild

Varies by configuration.

Rebuild physical drives.

Check Consistency

Varies by configuration.

Check consistency of virtual drives.

Creating, adding, or deleting a RAID array

This topic provides instructions on how to create, add, or delete a RAID array using the LSI Software RAID
Configuration Utility program.

Note:

Before you create a RAID array using the LSI Software RAID Configuration Utility program, ensure that

the server meets the required hardware configuration. For example, the server needs to have the required
number of hard disk drives installed and connected to the system board. See “About RAID” on page 72 for
information about the required number of hard disk drives for each RAID level. If you want to create a RAID 5
array using the LSI Software RAID Configuration Utility program, the server also needs to have a ThinkServer
RAID 100 or RAID 300 Upgrade Key for Advanced RAID. See “Installing or removing the ThinkServer RAID
100 or RAID 300 upgrade key for Advanced RAID” on page 112.

To create, add, or delete a RAID array using the LSI Software RAID Configuration Utility program, do the
following:

1. Start the LSI Software RAID Configuration Utility program. See “Starting the LSI Software RAID

Configuration Utility program” on page 74.

2. On the main interface of the program, do one of the following depending on your needs:

• If you want to create a RAID array, select

Easy Configuration

, and then follow the instructions on

the screen.

• If you want to add a secondary RAID array (if supported by your server), select

View/Add

Configuration

, and then follow the instructions on the screen to view the current configuration

and add a new RAID array.

• If you want to delete the existing RAID array, exit the program and back up all your data on the

hard disk drives. After backing up all your data, enter the program main interface and select

Clear

Configuration

. Select

Yes

when prompted and follow the instructions on the screen.

Attention:

Deleting an existing RAID array erases all data on the array. Ensure that you back up all

data before deleting the RAID array. If the operating system is installed on the RAID array you want to
delete, you need to reinstall the operating system after deleting the RAID array.

• If you want to delete the existing RAID array and create a new RAID array, exit the program and back

up all your data on the hard disk drives. After backing up all your data, enter the program main
interface and select

New Configuration

. Select

Yes

when prompted to proceed, and then follow the

instructions on the screen.

Attention:

Deleting an existing RAID array erases all data on the array. Ensure that you back up all

data before deleting the RAID array. If the operating system is installed on the RAID array you want to
delete, you need to reinstall the operating system after deleting the RAID array.

76

ThinkServer TD340 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer TD340

















































































































































































































































Reviews:

No comments

Related manuals for ThinkServer TD340

Yamaha MCX-2000 - MusicCAST Digital Audio Server Owner'S Manual Addendum preview
MCX-2000 - MusicCAST Digital Audio Server
Brand: Yamaha Pages: 25
Velvac Road-iQ Installation Manual preview
Road-iQ
Brand: Velvac Pages: 55
ANTAIRA STW-611C Installation Manual preview
STW-611C
Brand: ANTAIRA Pages: 2
Ablecom CE-HE130S4 Series User Manual preview
CE-HE130S4 Series
Brand: Ablecom Pages: 43
HP 2500 - Color LaserJet Laser Printer Installation Manual preview
2500 - Color LaserJet Laser Printer
Brand: HP Pages: 24
HP 2101nw User Manual preview
2101nw
Brand: HP Pages: 26
HP 4650 - Color LaserJet Laser Printer Install Manual preview
4650 - Color LaserJet Laser Printer
Brand: HP Pages: 2
HP 615N - JetDirect Print Server Setup Manual preview
615N - JetDirect Print Server
Brand: HP Pages: 56
HP 4550 - Color LaserJet Laser Printer Hardware Installation Manual preview
4550 - Color LaserJet Laser Printer
Brand: HP Pages: 32
HP 600N - JetDirect Print Server Hardware Installation Manual preview
600N - JetDirect Print Server
Brand: HP Pages: 44
HP 170X - JetDirect Print Server Hardware Installation Manual preview
170X - JetDirect Print Server
Brand: HP Pages: 30
HP 170X - JetDirect Print Server Installation And Configuration Manual preview
170X - JetDirect Print Server
Brand: HP Pages: 80
HP Appliance 4200 Manual preview
Appliance 4200
Brand: HP Pages: 116
HP 300X - JetDirect Print Server Administrator'S Manual preview
300X - JetDirect Print Server
Brand: HP Pages: 102
HP 635n Administrator'S Manual preview
635n
Brand: HP Pages: 194
HP 635n - JetDirect IPv6/IPsec Print Server Administrator'S Manual preview
635n - JetDirect IPv6/IPsec Print Server
Brand: HP Pages: 202
HP 4600 - Color LaserJet Laser Printer Technical Reference Manual preview
4600 - Color LaserJet Laser Printer
Brand: HP Pages: 309
HP Color laserjet 5500 Installation Manual preview
Color laserjet 5500
Brand: HP Pages: 6

Brands by name

Popular brands

Load more brands