Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual Download Page 160 | Manualshive

Page: 160 / 240

Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual Download Page 160

7. Position the drive adapter and the solid-state drive into the 3.5-inch drive bracket. Align the screw holes

in the drive adapter and the solid-state drive with the corresponding holes in the bracket. Then, install
the five screws to secure the drive adapter and the solid-state drive into the bracket.

Figure 86. Installing the screws to secure the drive adapter and the solid-state drive to the bracket

8. Slide the solid-state drive into the drive bay from the front until it snaps into position, and then

completely close the handle.

Figure 87. Installing the solid-state drive

9. Check the hard-disk-drive status LEDs to ensure that the solid-state drive is operating correctly. You

might have to restart the server for the newly installed solid-state drive to be recognized. See “Hot-swap

148

ThinkServer TD340 User Guide and Hardware Maintenance Manual

«
...
158
159
160
161
162
...
»

Summary of Contents for ThinkServer TD340

















































































































































































































































Reviews:

No comments